Contribute
Register

10.11 BrcmBluetoothInjector.kext pairing problem

Status
Not open for further replies.
kecinzer said:
Today another problem start happening :).
When I have connected some USB device like external HDD and it's active, BT devices is intereferncing - works with lags.
This definetely didn't happend on Yosemite.
Click to expand...

Are the devices you're plugging in USB2 or USB3?
 
loppol said:
Really thank you for the updates, and now the kext can pair my jawbone speaker, but it has a issue of sound dropping and lags.
I also tried to test the cases with and without any usb devices that is plugged but there is no big difference between 2 cases.
Click to expand...

Look in Windows to see which firmware is used by your device and check for updates. If you have newer firmware in Windows than in BrcmPatchRAM2.kext, we can update the firmware.

You can also test with the Windows firmware by rebooting from Windows. BrcmPatchRAM2.kext will not load firmware when there is firmware already present.
 
RehabMan said:
Look in Windows to see which firmware is used by your device and check for updates. If you have newer firmware in Windows than in BrcmPatchRAM2.kext, we can update the firmware.

You can also test with the Windows firmware by rebooting from Windows. BrcmPatchRAM2.kext will not load firmware when there is firmware already present.
Click to expand...

hi, Rehabman

I don't know how to compare the versions between the kext and one in windows.

based on OS X sys/info,there is no difference between before and after i update the firmware in windows and the version is v14 c5747

i have backed up and updated the firmware in windows from 12.0.1.410 to 12.0.1.654(the update date is 2015/7/2)

but the issue is still happening:(
 
loppol said:
hi, Rehabman

I don't know how to compare the versions between the kext and one in windows.

based on from OS X sys/info,there is no difference between before and after i update the firmware in windows and the version is v14 c5747

i have backed up and updated the firmware in windows from 12.0.1.410 to 12.0.1.654(the update date is 2015/7/2)

but the issue is still happening:(
Click to expand...

Try updated firmware from station-drivers: http://www.station-drivers.com/inde...tory&Itemid=353&func=fileinfo&id=1733&lang=en

You can confirm the firmware used by Windows in Device Manager.
 
loppol said:
thanks, Rehabman

I updated the firmware to 12.0.1.720 on windows and I also checked the version on OS X (still no change) and the speaker still has the issue:crazy:
Click to expand...

That is not a firmware version. Check in Windows Device Manager, Properties, Advanced, etc, for actual firmware file name being used. Make sure you cold boot Windows.
 
RehabMan said:
That is not a firmware version. Check in Windows Device Manager, Properties, Advanced, etc, for actual firmware file name being used. Make sure you cold boot Windows.
Click to expand...

Hi，Rehabman
I can boot the windows and I find the HCI version is 6.5747 and LMP version is 6.8718(from device manager->properties->advanced)

I'm not sure if this is the firmware version that we are looking for.:)
 
loppol said:
Hi，Rehabman
I can boot the windows and I find the HCI version is 6.5747 and LMP version is 6.8718(from device manager->properties->advanced)

I'm not sure if this is the firmware version that we are looking for.:)
Click to expand...

No. You're looking for this (image attached):

Capture.JPG
 

Attachments

  • wewant.jpg
    wewant.jpg
    129.6 KB · Views: 174
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top