Contribute
Register

[Guide] HP Envy Haswell series J/K using Clover UEFI

Status
Not open for further replies.
feloccio said:
Hopefully this works now:
View attachment 138208
Click to expand...

You have weird patch in DSDT for WiFi (not coming from my guide/repo). It is wrong too... You can't change your Ralink WiFi into Broadcom with a DSDT patch.

You should follow post #1 with regard to DSDT/SSDT patching. And replace your incompatible WiFi with BCM94352HMB as is called for by the guide.

There is a few other issues that will be fixed by using my DSDT/SSDT patching scripts (for example, USB3).

--

Your Ethernet is at 'en1' instead of 'en0'. You will need to fix that for Mac App Store access...

Try resetting the network interfaces. To do that, go into SysPrefs->Network and remove all interfaces, Apply, then remove /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist. Reboot, then add all your network interfaces back, starting with Ethernet.

--

Also, your Clover bootlog indicates you're not using the config.plist from my repo.
 
RehabMan said:
You have weird patch in DSDT for WiFi (not coming from my guide/repo). It is wrong too... You can't change your Ralink WiFi into Broadcom with a DSDT patch.

You should follow post #1 with regard to DSDT/SSDT patching. And replace your incompatible WiFi with BCM94352HMB as is called for by the guide.

There is a few other issues that will be fixed by using my DSDT/SSDT patching scripts (for example, USB3).

--

Your Ethernet is at 'en1' instead of 'en0'. You will need to fix that for Mac App Store access...

Try resetting the network interfaces. To do that, go into SysPrefs->Network and remove all interfaces, Apply, then remove /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist. Reboot, then add all your network interfaces back, starting with Ethernet.

--

Also, your Clover bootlog indicates you're not using the config.plist from my repo.
Click to expand...

Hi RehabMan, i've just received new wifi card BCM94352HMB, already replaced mine with it. I don't see any PCI cards in system report, bt/wifi not recognizing. I expect it need some patches required or injections. I've read http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html but didn't understand what i have to do(. Can you advise me some steps?
 
I decided to make a new installation again.
This time followed your guide exactly, from beginning to the end. (I should have done this in the first place)
Except disabling hibernation, it works very good for me with clover 3202.


Can you check if everything is alright?
View attachment Felixs MacBook Pro.ioreg
Thank You!
 
feloccio said:
I decided to make a new installation again.
This time followed your guide exactly, from beginning to the end. (I should have done this in the first place)
Except disabling hibernation, it works very good for me with clover 3202.


Can you check if everything is alright?
View attachment 138421
Thank You!
Click to expand...

It is not correct.

It appears you skipped the "Power Management" section.

Please read post #1, "Problem reporting".
 
RehabMan said:
Read and follow post #1.
Click to expand...
I did everything in post 1. Everything works perfect besides audio. No devices found, only hdmi.




 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top