- Joined
- Apr 13, 2015
- Messages
- 7
- Mac
- Classic Mac
- Mobile Phone
I've scoured the net and have not found any detailed guides regarding creating a dual boot Yosemite, WIndows 10 clover system. I was hoping someone here can point me in the right direction to a [FONT=inherit !important][FONT=inherit !important]tutorial[/FONT] that I may have missed or confirm my understanding of the various narratives i've found on the topic during my search. First my system stats:[/FONT]
Intel 4690k
ASROCK h97m pro4
Hyperx 8GB ram single DIMM
#1 EVO 850 120 GB
#2 EVO 850 120 GB ram
3 GB WD hard drive
[FONT=inherit !important][FONT=inherit !important]Asus[/FONT] GEFORCE GTX 960 sc[/FONT]
with that out of the way, i managed to [FONT=inherit !important][FONT=inherit !important]install[/FONT] Yosemite. I created the boot usb using unibeasty, Installed Yosemite, and went through post install using Clover EFIv2 installing for UEFI booting only and installing clover in the ESP. I have OSX yosemite booting on one of my EVO 850s via clover. Now I'm not completely clear on the easiest way to get [FONT=inherit !important][FONT=inherit !important]windows[/FONT][/FONT] 10 installed. Through various tips [FONT=inherit !important][FONT=inherit !important]online[/FONT][/FONT], i get the impression that it is as easy as following these steps:[/FONT]
1) unplug osx yosemite drive
2) plug in windows 10 drive to be
3) boot to windows 10 USB drive
4)select disk management [FONT=inherit !important][FONT=inherit !important]tool[/FONT] and delete all extra partitions if any[/FONT]
5) install windows 10 along with any updates
6) reconnect OSX drive
after reboot, Clover will detect windows 10 drive and its as easy as selecting OSX or Windows 10? is that all there is too it? Is there a recommended format that the windows 10 ssd should be formatted to? Also, if i want to use the 3gb hd for storage on both osx and windows, is there a recommended format (i.e. fat32 FAT etc?) or should I partition this seperately, one for OSX, on for windows 10?
Any help would be appreciated.
Intel 4690k
ASROCK h97m pro4
Hyperx 8GB ram single DIMM
#1 EVO 850 120 GB
#2 EVO 850 120 GB ram
3 GB WD hard drive
[FONT=inherit !important][FONT=inherit !important]Asus[/FONT] GEFORCE GTX 960 sc[/FONT]
with that out of the way, i managed to [FONT=inherit !important][FONT=inherit !important]install[/FONT] Yosemite. I created the boot usb using unibeasty, Installed Yosemite, and went through post install using Clover EFIv2 installing for UEFI booting only and installing clover in the ESP. I have OSX yosemite booting on one of my EVO 850s via clover. Now I'm not completely clear on the easiest way to get [FONT=inherit !important][FONT=inherit !important]windows[/FONT][/FONT] 10 installed. Through various tips [FONT=inherit !important][FONT=inherit !important]online[/FONT][/FONT], i get the impression that it is as easy as following these steps:[/FONT]
1) unplug osx yosemite drive
2) plug in windows 10 drive to be
3) boot to windows 10 USB drive
4)select disk management [FONT=inherit !important][FONT=inherit !important]tool[/FONT] and delete all extra partitions if any[/FONT]
5) install windows 10 along with any updates
6) reconnect OSX drive
after reboot, Clover will detect windows 10 drive and its as easy as selecting OSX or Windows 10? is that all there is too it? Is there a recommended format that the windows 10 ssd should be formatted to? Also, if i want to use the 3gb hd for storage on both osx and windows, is there a recommended format (i.e. fat32 FAT etc?) or should I partition this seperately, one for OSX, on for windows 10?
Any help would be appreciated.