- Joined
- Jul 3, 2017
- Messages
- 14
- Motherboard
- ASUS Z270-A Prime
- CPU
- Intel i7-7700K
- Graphics
- ASUS GeForce GTX 1070 Strix
Hi,
I am trying to install Sierra on my recently built PC, and I'm running into problems.
So far, this is what I have done:
Have I done something wrong?
I am trying to install Sierra on my recently built PC, and I'm running into problems.
So far, this is what I have done:
- Adjust all BIOS settings to the recommended settings, except SATA mode, which I keep as Intel Rapid Storage Technology since I have a RAID array configured. Regardless, any drives not in the RAID array (the drive I want to install to is not in the RAID array) are supposed to default to AHCI (relevant to step 3)
- Use unibeast to create a bootable Sierra USB
- Add AHCIPortInjector.kext to the bootable USB, since for some reason the installer wouldn't detect any SATA drives without it
- Boot the Sierra install partition from Clover on that USB, use fake cpu id 0x0506E3
- Install Sierra to internal drive
- Boot the newly installed Sierra OS from Clover on the USB, still using fake cpu id
- Run multibeast and only do quick start for UEFI, no other changes
- Attempt to boot Sierra OS from Clover on the internal drive, still using fake cpu id
Have I done something wrong?