NVIDIA GT610 - 10.8.0 -10.8.2 Fix
- Thread starter beelzebozo
- Start date
- Status
- Joined
- Feb 16, 2011
- Messages
- 348
- Motherboard
- MSI X299 RAIDER
- CPU
- i9-7940X
- Graphics
- VEGA FE
- Mac
- Classic Mac
- Mobile Phone
NVIDIA GT610 - 10.8 Fix
Testing My EVGA GT 610 1GB: 2xDVI 1xminiHDMI, 10.8, Z68,
Whats works
1)Dual monitors through any two combination of the jacks listed above.
What Does not work.
1)Triple monitors
If I plug in all 3 outputs on the card, one of the monitors goes out and the other two start blinking back and forth without stoping.
As soon as i unplug one cable dual display is working and all is good.
Any one have any ideas as to why?
In 10.6.7 I had triple mojitos (2 monitors 1projector) working without any injection on an x58 board with a ATI HD5850.
Upgraded to 10.6.8 lost the triple feature. Was able to get it back by testing with different frame buffers.
Now I'm on 10.8 and Thanks to this thread I'm able to use my GT610.
Was hoping someone can point me in any direction as to how to get triple monitors working.
Thanks in advance.
Testing My EVGA GT 610 1GB: 2xDVI 1xminiHDMI, 10.8, Z68,
Whats works
1)Dual monitors through any two combination of the jacks listed above.
What Does not work.
1)Triple monitors
If I plug in all 3 outputs on the card, one of the monitors goes out and the other two start blinking back and forth without stoping.
As soon as i unplug one cable dual display is working and all is good.
Any one have any ideas as to why?
In 10.6.7 I had triple mojitos (2 monitors 1projector) working without any injection on an x58 board with a ATI HD5850.
Upgraded to 10.6.8 lost the triple feature. Was able to get it back by testing with different frame buffers.
Now I'm on 10.8 and Thanks to this thread I'm able to use my GT610.
Was hoping someone can point me in any direction as to how to get triple monitors working.
Thanks in advance.
- Joined
- Feb 16, 2011
- Messages
- 348
- Motherboard
- MSI X299 RAIDER
- CPU
- i9-7940X
- Graphics
- VEGA FE
- Mac
- Classic Mac
- Mobile Phone
NVIDIA GT610 - 10.8 Fix
Ok guys never mind. Kept snooping around and in windows found out that the EVGA GT610 in fact only can handle 2 displays on at one time. SO no triple monitor set up. So I guess at the end of the day not bad for a -$50 card. So yet again thanks for helping me getting it running in the first place.
Ok guys never mind. Kept snooping around and in windows found out that the EVGA GT610 in fact only can handle 2 displays on at one time. SO no triple monitor set up. So I guess at the end of the day not bad for a -$50 card. So yet again thanks for helping me getting it running in the first place.
- Joined
- Mar 10, 2010
- Messages
- 36
- Motherboard
- Gigabyte z390 Designaire
- CPU
- i3-9100
- Graphics
- RX 580X
- Mac
- Mobile Phone
NVIDIA GT610 - 10.8 Fix
That Device ID(0x104010de&0xffe0ffff)is that of the Gt 520 I have with 1 gig of memory. By the way which works flawlessly in Lion and Mountain Lion. Sleep,Wake, etc. Something my GTX 660 Ti can't do.
- Joined
- Sep 3, 2012
- Messages
- 1
- Motherboard
- MacPro 1,1
- CPU
- 2x2.66 Ghz Dual Core Xeon
- Graphics
- EVGA GT610 2gb
- Mac
- Classic Mac
- Mobile Phone
NVIDIA GT610 - 10.8 Fix
tried the fix for the gt 610 on my mac pro 1,1 with os 10.6.8, with no luck...ideas?
View attachment 30431
tried the fix for the gt 610 on my mac pro 1,1 with os 10.6.8, with no luck...ideas?
View attachment 30431
- Joined
- Aug 29, 2012
- Messages
- 1
- Motherboard
- OS X 10.8.1
- CPU
- Processeur INTEL Core i5 2400 - 3.1 GHz - HD 2000
- Graphics
- nVidia Pny GeForce GT 610
- Mac
- Classic Mac
- Mobile Phone
NVIDIA GT610 - 10.8 Fix
Hello or good evening =)
How to enable QE/CI on Pny nVidia Geforce GT 610 ?
The fix recognizes the card properly but QE/CI is not working.
My config:
Hackintosh 10.8.1 made with unibeast and DSDT extracted from the original bios
CM: Gigayte H61M-D2H-USB3 (rev f6)
CPU: INTEL Core i5 2400 - 3.1 GHz - HD 2000
Excuse me for the translation via google.
Hello or good evening =)
How to enable QE/CI on Pny nVidia Geforce GT 610 ?
The fix recognizes the card properly but QE/CI is not working.
My config:
Hackintosh 10.8.1 made with unibeast and DSDT extracted from the original bios
CM: Gigayte H61M-D2H-USB3 (rev f6)
CPU: INTEL Core i5 2400 - 3.1 GHz - HD 2000
Excuse me for the translation via google.
- Status