Loading bar won't move. PCI configuration begin

[cubby208]

Did the same thing as the picture above. System uptime in nanoseconds. Then it went dark.

 

[Jithin.C.V]

[SUB]Figured it out voodoo thing was to give support for 6 and 8 cores (I'm 6) and the terminal thing is a patch.[/SUB]

Ok.. That kext is required for Haswell-E CPU systems.. Have you copied it??

Try booting with "dart=0 npci=0x3000 cpus=1 -f -v -x"

 

[cubby208]

Where do I get this thing and how do i put it on.

 

[Jithin.C.V]

Where do I get this thing and how do i put it on.

On the Chimera screen. Before pressing enter key just type as it is.

 

[cubby208]

Sorry I didnt mean the flags. I meant the KEXT

 

[Jithin.C.V]

Sorry I didnt mean the flags. I meant the KEXT

Download the kext from below guide for your CPU then copy the kext to /Extra/Extensions/ folder of of your bootable USB

http://www.tonymacx86.com/mavericks-desktop-guides/118831-gigabyte-ga-x79s-up5-mavericks-guide.html

 

[cubby208]

Ok I ran it and it got stuck here
https://app.box.com/s/61qp8rwnr3v36hr8gycxznxs5huf9mdj

Oh and soon after the photo a red bar appeared at the top.

 

[Jithin.C.V]

Ok I ran it and it got stuck here
https://app.box.com/s/61qp8rwnr3v36hr8gycxznxs5huf9mdj

Oh and soon after the photo a red bar appeared at the top.

Red bar??

Also try booting with "nv_disable=1 -f -v"

 

[cubby208]

Error #1

Error #2


Ok. So I remade the drive with unibeast and moved in the patch like I was supposed to. Here are some flags I tried.

Error #1: -v -f nv_disable=1 mpci=0x2000
Error #2: nv_disable=1 -f -v

Is it wierd that it got to a PCI error even though i did nv_disable=1

 

[Jithin.C.V]

Error #1
View attachment 131785
Error #2
View attachment 131786

Ok. So I remade the drive with unibeast and moved in the patch like I was supposed to. Here are some flags I tried.

Error #1: -v -f nv_disable=1 mpci=0x2000
Error #2: nv_disable=1 -f -v

Is it wierd that it got to a PCI error even though i did nv_disable=1

Is the kernel patched as per the guide which you have on post#7 ??

If you are stuck with PCI Configuration Begin, then you have to try with one of the flag "npci=0x2000" or "npci=0x3000". The flag which is helping to pass the PCI Configuration Begin, that flag you have use always. Even if we are giving any other flag suggestions in that case also you have add the npci flag along our suggestion flags.

Try booting with "npci=0x2000 nv_disable=1 -f -v"