- Joined
- Aug 4, 2012
- Messages
- 3
- Motherboard
- Ga-X79-UD5
- CPU
- i7-3930K
- Graphics
- GTX 680
I'm currently stuck installing Lion using Unibeast 1.7.0. My rig is as follows:
Gigabyte GA-x79-UD5 Motherboard
Intel i7 3930K Processor
Gigabyte GeForce GTX 680
G-Skills DDR3 32gb RAM
250gb Samsung SSD 6 gb/s
1TB Seagate HDD 6 bg/s
When installing I've tried putting in numerous codes and different BIOS settings. Does anyone have a copy of the BIOS settings for this specific board? Also what codes should I use? So far the farthest I've gotten toward the installation is getting an ethernet address (See picture)
The codes that have been most successful are:
Graphics Enabler=No
npci=0x2000
-v
Any help would be greatly appreciated! Thanks!
Gigabyte GA-x79-UD5 Motherboard
Intel i7 3930K Processor
Gigabyte GeForce GTX 680
G-Skills DDR3 32gb RAM
250gb Samsung SSD 6 gb/s
1TB Seagate HDD 6 bg/s
When installing I've tried putting in numerous codes and different BIOS settings. Does anyone have a copy of the BIOS settings for this specific board? Also what codes should I use? So far the farthest I've gotten toward the installation is getting an ethernet address (See picture)
The codes that have been most successful are:
Graphics Enabler=No
npci=0x2000
-v
Any help would be greatly appreciated! Thanks!