3930k

  1. benjackson

    Should I leave an old GTX 680 in my hack with a Vega 56?

    Hey guys! Just a random question. I built a new machine last week, and it's smokin'. A 7920X with the ASUS X299-A motherboard. I'm getting 2830 on cinebench, a huge jump from my 700-800 score on my previous hack, the 3930K from 2012 with a gigabyte x79-up4 motherboard. I had a GTX 980 in the...
  2. showkingpup

    [Solved] Need Help Asus X79 pro 3930k High Sierra

    Hello Everybody. looking forward to fresh install High Sierra 10.3.4. Gets "macOs could not be installed on your computer". ( attached image) Installing High Sierra On following Specs: Asus X79 Pro motherboard i7 3930K Cpu Xfx 6870 GPU 32 GB ram corsair Added Bootflags: darkwake=0 dart=0...
  3. steefykage

    Help to install High Sierra on x79 motherboard

    Hi! I'm looking for help to install High Sierra in my PC. I have tried many times but without success. Hardware list: Intel i7 3930k Asrock Extreme 4 x79 Vengeance ddr3 1333mhz Nvidia 1080 GTX Samsung ssd 830 Thanks for your help!
  4. Eastpond

    3930K Sabertooth X79 Overclock Issue

    I've followed a few guides and got my overclock stable at 4.6Ghz. Running 10.9.2, the OC is based on an offset of .010. System is stable both at idle (left it on for a few days) and running "yes /dev/null/" tests in Terminal for 24 hours. Temps max out at 60C according to HWMonitor. The only...
  5. sachabest

    P9X79 Deluxe | Sandy Bridge E Processor (i7-3930k) Power Management on Sierra

    You may have noticed that your CPU runs at its max clock speed on a vanilla hackintosh install. This is bad for two reasons - it is actually slower than the normal stepping curves Intel generates (no turbo boost), and wastes a ton of power/CPU life. Fear not - you can inject an SSDT into Clover...
  6. sachabest

    [SUCCESS] 10.12.6 | P9X79 DELUXE | i7-3930k w/ Turbo

    sachabest's Build: P9X79 DELUXE - i7-3930K - GTX 980 Components ASUS P9X79 Deluxe https://www.amazon.com/dp/B0064L8UJM/?tag=tonymacx86com-20 Intel i7-3930K Processor https://www.amazon.com/dp/B00603QXPM/?tag=tonymacx86com-20 NVIDIA stock GTX 980 (can't find link, this was sent to me by...
  7. goronguy

    [SUCCESS] SIERRA 10.12.2 - GA-x79-UD5, 3930k, GTX 670

    Josh's Hackintosh Build JAN 31st 2017 OSX SIERRA (10.12.2) INSTRUCTIONS I. SPECS: GIBABYTE GA-X79-UD5 32GB 1600MHZ CORSAIR RAM 3930K INTEL CHIP GIGABYTE GTX 670 2GB GRAPHICS H100i...
  8. rongrandia

    No USB at "Welcome" install screen - HAYLP! GA-X79 ud4 i7 3930k El Cap

    Mavericks was getting a bit long in the tooth, and I finally got the courage up to attempt a fresh El Cap install on my little beasty after re-visiting this tremendous resource/community here at Tonymac. Man, you people are amazing! Thanks so much for all you do for helpless noobs such as...
  9. Rompicollo

    Rampage IV extreme No sound on yosemite

    Hi all, I've just installed Yosemite and after post-installation with Multibeast 7.5, I have no sound after reboot and I already tested old Multibeast versions, rebuild cache..etc In chimera plist, I use : ncpi=0x2000 dart=0 -f If I don't boot with -f, I get stuck at this line on the boot...
  10. extreme300

    Help installing on GA-x79-UD3 with 3930k and GTX 970

    [Solved] Help installing on GA-x79-UD3 with 3930k and GTX 970 Hey Everyone, Like the title suggests I am having trouble installing Yosemite on my system: MB: GA-x79-UD3 CPU: 3930k GPU: GTX 970 I've tried a multitude of different boot flag combinations which usually end up with it...
  11. tiberiunedelea

    3930k @ 4.7Ghz on Asus P9X79 really slow

    I have a problem with my CPU it seems really bad for what it is 4.7Ghz 3930k watercooled in benchmarks Cine bench 43.95 FPS 807 cb Geek 14359 points Instaled with Clover EFI partition, Audio works allright (ALC892), SATA works good HWMonitor reports 32 multiplier set on all...
  12. Davirus

    3930k suddenly is unknown

    I remember that OSX used to detect my 3930K as a Xeon processor, but, since the latest Chimera update it started to show as unknown. I manually modded it to show even more "accurate" information But other applications, such as MachineProfile, still fails to correctly detect my CPU. Also...
  13. nickd

    First Hackintosh Installation

    Today I purchased a PC that I believe is Hackintosh compatible, could someone please clarify this for me? The parts are as follows: Chassis: Thermaltake Level 10GT Motherboard: Asus Sabertooth X79 CPU: Intel core i7 3930k Sandy Bridge-E 3.2Ghz 6 core RAM: GSkill Ripjaws Z Series 1866 CL 9.0...
  14. jgbsound

    P9X79 Pro Install of Mavericks (this was just an upgrade from Lion) seems to work except the RealTek

    Forgive me but I'm not clear on what to do. I had audio for a while under Lion, then it randomly disappeared. Cut to me updating to Mavericks and still I have no audio. I did find something that seemed pretty dense in regards to how to enable audio but, for the life of me, I'm unable to...
  15. shilohh

    i7-4930K - Asus Rampage IV Extreme - 32GB RAM - GTX 770 4GB [Success!!]

    Shilohh's Build for Eric: i7-4930K - Asus Rampage IV Extreme - 32GB GSkill Ram - GTX 770 4GB Clover bootloader Updated for macOS Sierra. Updated to work with the Rampage IV Black Edition because the R4E has limited availability now. Users of other Asus X79 boards except for the X79D, can try...
  16. ThatGuyWhoCouldFly

    Is my PC capable of running OS X Mavericks?

    Hey everyone! I'm very interested into turning my PC into a Hackintosh and have two operating systems on my computer. I'm just curious if these specs are compatible with OS X Mavericks? Asus Rampage IV Extreme Mobo Intel i7-3930k EVGA GTX 780 3GB OCZ 360gb SSD LG Blu-ray drive I think a...
  17. dfgw44c

    Stock Build, Special Problems - X79-UP4 3930k - GTX 570

    A bit of a repost from the guide thread, but: Gigabyte X79-UP4, firmware F4 3930k 8x4GB 2133mhz G.Skill Ripjawz EVGA Superclocked GTX 570 Loading Unibeast 3.0.1 from 16GB sandisk cruzer or 64GB Sandisk SSD (just to rule out the thumb drive) From Chimera, I've tried quite a few boot...
  18. cassers

    Can't click on task bar (to click on utilities to partition) during installation (details inside):

    Hi all, Im having an odd problem which I can't find repeated at all on the net after searching. During installation I get to the "Install OS X" screen. From what I've understood I need to partition my sad during this stage using Disk Utilities. The problem here is the fact that I can't click on...
  19. Davirus

    X79 SpeedStep

    I'm wondered, I have readed that in 10.9.2 most X79 CPU's now have SpeedStep working OOB, and some other people say that's wrong. I have noticed my CPU (3930K) actually change frequencies, but not sure if that means I have SS enabled features. Is there any new information about it?
  20. theandrewlucas

    Guide: Gigabyte x79-UP4, Intel 3930k, Dual GTX 770, Samsung SSD 256GB

    Mavericks instal on System: Gigabyte GA-X79-UP4 Intel i7 3930k HX 850 PowerSupply EVGA Geforce GTX 770 Second EVGA Geforce GTX 770 GSKI RipJawsZ F3-12800CL10Q2-64GBZL Samsung SSD 256GB (Mavericks Boot Drive) Seagate HDD 3TB (Storage Mavericks) Seagate SSHD 1TB (Windows 8 Boot...
Back
Top