Install Guide : Intel Haswell NUC Core i5 (D54250WYK) V2 (Mavericks)

[jackkel]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Twilight76, thanks for the Maxmem tip.

It worked for the first time i ran the installer, but when i tried to run the installer again, another error occurs.

if im not wrong, the panic errors are not always the same.

 

[Twilight76]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

hm i got the same error at this time.
I think this worked: -x maxmem=4096 (added to the normal parameters from the Guide)

 

[taeuberteg]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Twilight -
i have the same problem, no hdmi sound. Built in sound is only listed.

Looks like everything installs correctly under system report...

Ok so far so good. My Installation is complete but i don't get HDMI Sound

The HDMI Output under System Report is the same as in the Guide but i dont get the HDMI Output under System Preferences > Sound. Only the Build-In Sounds are listet.

The HDMI Sound is from the hardware working (testet before with OpenElec)

My Hardware:
D54250YWYK (Bios 25)
2 x 4GB Crucial Ballistix Sport DDR3-1600 PC3-12800 CL9
60 GB mSATA Kingston
Connectet with my Denon AVR-1611 (5 Channel AV Receiver) over HDMI on my Sony TV.

 

[WonkeyDonkey]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Ok so far so good. My Installation is complete but i don't get HDMI Sound

The HDMI Output under System Report is the same as in the Guide but i dont get the HDMI Output under System Preferences > Sound. Only the Build-In Sounds are listet.

The HDMI Sound is from the hardware working (testet before with OpenElec)

My Hardware:
D54250YWYK (Bios 25)
2 x 4GB Crucial Ballistix Sport DDR3-1600 PC3-12800 CL9
60 GB mSATA Kingston
Connectet with my Denon AVR-1611 (5 Channel AV Receiver) over HDMI on my Sony TV.

What files do you have in the /Extra folder on your NUC system drive ?

 

[WonkeyDonkey]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

got a "error when starting up the computer" and the following errors.

latest version 25 bios, D54250WYKH, 10.9.3 Mavericks.

Appreciate any help i can get!

View attachment 93835

Memory parts, make & model ?

 

[WonkeyDonkey]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Boot issue-Resolved! Minihack I tried your fix but the issue wasn't with the OSX ssd. What it ended up being is when the NUC has efi boot enabled, it was creating my Windows SSD in GPT. This made it so even if I booted into the mSata I still could not boot into Windows as it now required an efi boot.

Took a bit, but I reformatted my USB to be able to boot without UEFI, formatted the Windows SSD in cmd prompt, rebooted, changed bios settings disabling UEFI, rebooted, installed Windows.

Rebooted, re-enabled UEFI boot, rebooted, boots properly to the mSata. When I select the Windows partition not errors booting into Windows 8.

Thank you so much Wonkey Donkey and Minihack for your help. I have not had any crashes yet on this fresh build and Bluetooth and WiFi seem to be working fine.

learjet7

Both boot options (UEFI and Legacy) are enabled in the bios because without it, some SSD's were not showing up at all. If it works for your setup without UEFI thats fine. I'm not running dual boot here and certainly wouldn't touch Win8 lol

 

[jackkel]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

hm i got the same error at this time.
I think this worked: -x maxmem=4096 (added to the normal parameters from the Guide)

unfortunately its not working...

hope someone can shed some light on this.

I did manage to get it working on previously using build instructions for 10.9.0 and bios version 24...

 

[WonkeyDonkey]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Twilight -
i have the same problem, no hdmi sound. Built in sound is only listed.

Looks like everything installs correctly under system report...

From the guide :

And above all, when posting requests for help, state clearly the make, model and capacity you are using for the following hardware:

Ram Memory
SSD / Hard Drive
Wifi/Bluetooth card or devices

I will not respond to requests for help without this information provided.'

Also which monitor and connection type are you using ?

 

[jackkel]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Memory parts, make & model ?

Ram is Crucial 8gb single stick, DDR3 1600 Sodimm 1.35v , CT102464BF160B
SSD - 120GB Crucial M500 mSATA CT120M500SSD3
No wifi card installed.
Monitor connected on HDMI

BTW, I had no issues using your previous build using older versions.

And thanks for the effort you put in!

 

[WonkeyDonkey]

Installation Guide : Intel Haswell NUC Core i5 (D54250WYK) V2

Ram is Crucial 8gb single stick, DDR3 1600 Sodimm 1.35v
Msata - 120GB Crucial M500 CT120M500SSD3
No wifi card
Monitor connected on HDMI

I think your issue may be down to the fact you are using a single memory stick and therefore in single channel mode. No Apple machine uses this and it may be tripping the installer.

Also, dont go using other boot flags unless guided to.

maxmem=4096 is totally incorrect for you regardless.

In your case, maxmem=8192 may work but this is not guaranteed.