I apologize if I should be over at nvme-spoof thread, but since these machines should be very similar, I'm here.
I followed the guide and can get it working on an internal SSD, but I'm having trouble with the nvme.
I have a BPX MyDigitalSSD NVMe PCIe 3.0 MDNVME80-BPX-0312. NUC7i3bnh.
I have tried tons of stuff, but at the core, am adding only:
config_install_nuc7.plist --> EFI/CLOVER/config.plist //with name-change
SSDT_NVMe-Pcc.aml --> EFI/CLOVER/ACPI/patched/
and the kexts:
FakeSMC.kext
GenericUSBXHCI.kext
HackrNVMe..12_5.kext
IntelMausiEthernet.kext
// all kexts to Other
// Internet is working.
And the HFSPlus.efi --> EFI/CLOVER/drivers64UEFI
My Windows Boot gave me PCI Paths..
[Device Name]
\_SB.PCI0.RP09.PXSX
[Location Paths]
PCIROOT(O)#PCI(ID00)#PCI(0000)
ACPCI(_SB_)#ACPI(PCI0)#ACPI(RP09)#ACPCI(DXSX)
Changing the RP13 to RP09 (in both appearances) didn't work, so I tried naming it etc (fail).
Modifying as told, adding SSDT_NVMe-Pcc.aml to .../patched
Did not modify
Should I be changing something in the config.plist file as well? The directions are extremely verbose with loops and I'm having trouble understanding them.
I do have USB's attached and enabled (bios) at the headers. Not sure if that is an issue. Ubuntu (currently on the nvme drive) works fine, and whilst Clover can see the nvme, OSX cannot (and thus cannot install osx).