DSDT for Z77 extreme 6

[MiniITX]

It will be easy for you if you downgrade the BIOS to 2.4 version.
DSDT and all the other options are available in my above post. > http://www.tonymacx86.com/dsdt/94273-dsdt-z77-extreme-6-a.html#post583164

1, Download the BIOS .rom file. > http://biosrepo.wordpress.com/asrock/z77/
2, Copy it to a pen drive formatted to FAT32. Connect the pen drive to a USB 2 port.
3, Use the inbuilt BIOS flashing option and flash the BIOS.

Once the BIOS flashing is done follow the step by step process till step 4 > http://www.tonymacx86.com/dsdt/94273-dsdt-z77-extreme-6-a.html#post583164

5, Download Multibeast for Mountain Lion and run it with the below settings and reboot > http://www.tonymacx86.com/downloads.php?do=file&id=155

Multibeast settings Specific for your Hardware.




Note: Except Creative X-Fi Elite Pro everything else will work.
The sound card will need a correct kext (driver).

 

[666dsa666]

It will be easy for you if you downgrade the BIOS to 2.4 version.
DSDT and all the other options are available in my above post. > http://www.tonymacx86.com/dsdt/94273-dsdt-z77-extreme-6-a.html#post583164

1, Download the BIOS .rom file. > http://biosrepo.wordpress.com/asrock/z77/
2, Copy it to a pen drive formatted to FAT32. Connect the pen drive to a USB 2 port.
3, Use the inbuilt BIOS flashing option and flash the BIOS.

Once the BIOS flashing is done follow the step by step process till step 4 > http://www.tonymacx86.com/dsdt/94273-dsdt-z77-extreme-6-a.html#post583164

5, Download Multibeast for Mountain Lion and run it with the below settings and reboot > http://www.tonymacx86.com/downloads.php?do=file&id=155

Multibeast settings Specific for your Hardware.

View attachment 52454


Note: Except Creative X-Fi Elite Pro everything else will work.
The sound card will need a correct kext (driver).

Hello,
Thank you for your help.
The dsdt.aml you uploaded give me kernel panic.
Maybe you can check mine, I've finally extracted it.
Thank you for your help

 

[[email protected]]

1, Set the BIOS as per below.

Advance > Advanced\North Bridge Configuration
Primary Graphics Adapter > GPU* (If you want to use HD3000 - Onboard)
Share Memory > 64MB*
Render Standby > Disabled*

Advanced\South Bridge configuration
Deep Sleep > Enabled in S5*

Advanced Storage Configuration
SATA Mode > AHCI*
Hard disk SMART > Enabled*

ADvanced\Super IO config > Serial Port - Disable

Advanced ACPI config
Suspend to RAM > Disabled*
ACPI HPET Table > Enabled*
RTC Alarm power on > by OS*
reset of the option here is disabled.

Not so imp settings but runs the system quite. Once you boot in fans are controlled by OSX.
HW Monitor
CPU FAN > Level 2
Chassis fan settings > Level 4

2, Fresh mountain Lion installation > http://www.tonymacx86.com/downloads.php?do=file&id=155

3, Download both DSDT and Broadcom 57781 unzip and keep on the desktop.

4, Download the tool Kext beast and run it. This will install the "Broadcom 57781.kext" > http://www.tonymacx86.com/downloads.php?do=file&id=32

5, Download Multibeast for Mountain Lion and run it with the below settings and reboot > http://www.tonymacx86.com/downloads.php?do=file&id=155


View attachment 52403


Update to 10.8.3 for smooth Graphics performance.
If you do the above steps correctly you should have a perfectly working hackintosh.

Ethernet kext credits > Mieze

-

Thank you my friend thank you

 

[MiniITX]

Hello,
Thank you for your help.
The dsdt.aml you uploaded give me kernel panic.
Maybe you can check mine, I've finally extracted it.
Thank you for your help

Did you flash the BIOS with modded BIOS version 2.4? That DSDT was extracted from the BIOS version2.4.
You cannot use it if you are on BIOS version 2.6.

If possible take a photo of KP when you run into one. If you have not flashed the BIOS with modded BIOS rom you will KP.

-

 

[Xelerater]

@MiniITX

Thank you very much for helping me out, i have not flashed the modded bios nor the DSDT but my hackintosh is working without that, i followed your other recommendations and now i'm done with that part thanks once again.. but now i'm stuck with Creative X-Fi Elite Pro, do u have any Idea / guide me, which Kext will work for this soundcard? I have tried so many kexts but still no use

I also want to Learn about DSDT? i mean what is the purpose of DSDT, i want to know the benefit because i'm already running mac ML 10.8.3 without DSDT, however I sometimes get some KP's if I try to boot when some USB is plugged in like (Cpu Caller 3 a freed zone element has been modified or something like that. and its is related to some IO kext) and if I get proper DSDT, ill surely use it and then i wont get random KP's?

I have generated my DSDT.dsl though Mac Os X ML 10.8.3 using DSDT Editor Mac, please have a look (attachment), Thanks.

 

[MiniITX]

@Xelerater, Suggest you do a fresh installation and install correct kext using Multibeast for Mountain Lion.
The onboard Audio should work fine with the DSDT.

Note sure about the USB error a fresh installation can resolve it.

Not sure about the kext for the Sound card as well. Google is your friend.

-

 

[Xelerater]

@MiniITX
Thanks alot friend for the DSDT.. I just want to know one more thing, i have not installed modified bios and this DSDT.dsl was generated without modded bios, so the DSDT which you have patched for me will work for me without modded bios?

Yea friend, i tried google for about thousand times for this sound card and every time i came up with nothing :S any how kindly please keep that sound card in mind so when ever you see something related to Creative X-Fi Elite Pro, just let me know, Thanks alot.

 

[MiniITX]

You need to flash the BIOS of your motherboard with the modded BIOS .rom file to avoid any post installation issues.
Refer to the below links for more info.

Copy to .rom file in to a pen drive formatted to the FAT32.
Connect the pen drive to a USB2 port.
Hit the power button of the computer and hit DELETE key as soon as you see ASRock welcome screen to enter the BIOS.
Using the in-build BIOS flasher flash the BIOS.

Video > https://www.youtube.com/watch?v=3RrGMLBTQ_M

Flash the BIOS with pre-patched BIOS rom's > http://biosrepo.wordpress.com/asrock/

More info about modded BIOS rom > http://www.tonymacx86.com/dsdt/47397-msi-asrock-foxconn-1155-patched-bios-thread.html

 

[JuaNiYoT]

(Sorry about my English, I'm Spanish)

Hi friend,

I have a computer with similar hardware and I get boot:

-Asrock Z77 Extreme 6
-i7 3770k
-Official Bios
-SSD 120GB
-NVIDIA GTX 560ti

The process that I have do is:
1- Unibeast + Mac OS X Mountain Lion (Official) + USB 8GB
2- Install. (To install I must use -x for secure boot, in other case the screen doesn't show)
3- Boot with USB of installation in Mac OS X. (Sometimes it doesn't show nothing and the screen is black, but finally I can boot. I don't use -x for secure boot)
4- In multibeast install easybeast and support for intel grhapics and open cl for Nvidia.
5- Reboot and all works except sound and ethernet, so I install the correct kext for Broadcom BCM57781.

I hope I can help you with my experience.

Now I want to do an DSDT and enable sound of motherboard and HDMI. I'm using my keyboard Logitech G13 for get sound with the audio jack output.

EDIT. The boot is a bit slow and I want to improve this. Also if I install the 10.8.3 version I can't boot, so I use 10.8.2 version of ML

Hello MiniITX, I install the patched Bios, can you help me with the DSDT?

https://www.dropbox.com/s/jug307fnuq2cjyp/DSDT_JuaNiYoT_z77Extreme6 - Here is my DSDT.

Now I haven't sound through the GTX 560TI HDMI or jack of motherboard

 

[Xelerater]

@MiniITX
Thanks alot friend for all the support, i must appreciate your efforts