- Joined
- Aug 6, 2011
- Messages
- 59
- Motherboard
- Gigabyte Z97X-Gaming5
- Graphics
- Gigabyte GTX 780 GHz Edition
- Mac
- Classic Mac
- Mobile Phone
First off my specs:
Gigabyte Z77-DS3H ver 1.0 with F9 bios. I5-2500k
Intel HD 3000 with 1x Screen (boot IGFX first)
Gigabyte GTX 780 with 3x Screens.
Bootdrive with chimera: Crucial m500 SSD 240GB, also contains OSX.
I bought this setup early 2012 i think and it has been working 100% with no issues, first with 107, then 10.8 and now 10.9.2
Since yesterday it won't boot, I can still boot normal and go to windows which I have on a second SSD.
my KP:
https://www.dropbox.com/s/qdwxwyhntni1zoi/20140524_112823.jpg
What I have tried:
booting with -x
Booting from my 10.9 installer usb pin and choosing my current installation: same issue.
Booting from usb installer and choose the install: installer starts normal.
The machine has not been changed in awhile, and been 100% stable up until now.
My hope was that I could boot with the usb pin to my old installation and reinstall multi beast, but that doesn't work.
As it stands now I'm thinking of either try delaying the applecpupowermanagement kext in S/L/E or reinstalling.
If more info is needed, please ask for it and i'll try to give it.
It's not my first hack, I earlier had an optiplex 740 with Core 2 Dou, then an Asus p45 build with Core2 Duo too.
I've ran into issues before, but always managed to fix them with some forum browsing.
Gigabyte Z77-DS3H ver 1.0 with F9 bios. I5-2500k
Intel HD 3000 with 1x Screen (boot IGFX first)
Gigabyte GTX 780 with 3x Screens.
Bootdrive with chimera: Crucial m500 SSD 240GB, also contains OSX.
I bought this setup early 2012 i think and it has been working 100% with no issues, first with 107, then 10.8 and now 10.9.2
Since yesterday it won't boot, I can still boot normal and go to windows which I have on a second SSD.
my KP:
https://www.dropbox.com/s/qdwxwyhntni1zoi/20140524_112823.jpg
What I have tried:
booting with -x
Booting from my 10.9 installer usb pin and choosing my current installation: same issue.
Booting from usb installer and choose the install: installer starts normal.
The machine has not been changed in awhile, and been 100% stable up until now.
My hope was that I could boot with the usb pin to my old installation and reinstall multi beast, but that doesn't work.
As it stands now I'm thinking of either try delaying the applecpupowermanagement kext in S/L/E or reinstalling.
If more info is needed, please ask for it and i'll try to give it.
It's not my first hack, I earlier had an optiplex 740 with Core 2 Dou, then an Asus p45 build with Core2 Duo too.
I've ran into issues before, but always managed to fix them with some forum browsing.