Contribute
Register

Asus UX51VZA

Status
Not open for further replies.
I booted the system using the suggested flags and the boot sequence freezes at "[ PCI Configuration end, bridges 5, devices 13 ]". As the bootloader came up, I noticed several messages about "EBIOS Read errors." Any other suggestions? The Nvidia device was skipped -- I saw a message about that as the system booted.
 
Duncan.Britton said:
I booted the system using the suggested flags and the boot sequence freezes at "[ PCI Configuration end, bridges 5, devices 13 ]". As the bootloader came up, I noticed several messages about "EBIOS Read errors." Any other suggestions? The Nvidia device was skipped -- I saw a message about that as the system booted.
Click to expand...

Post photo.
 
I will just type out everything that I can see on the screen:
Code: 
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
vm_page_bootstrap: 3033800 free pages and 95544 wired pages; root:xnu-2782.1.97~2/RELEASE_X86_64
vm_page_bootstrap: 3033800 free pages and 95544 wired pages
kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
zone leak detection enabled
"vm_compressor_mode" is 4
multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
standard timeslicing quantum is 10000 us
standard bakcground quantum is 2500 us
mig_table_max_displ = 13
TSC Deadline Timer supported and enabled
SAFE BOOT DETECTED - only valid OSBundleRequired xekts will be loaded.
"name" not a kext
"Kernel-__SYMTAB" not a kext
NullCPUPowerManagement::init: properties=0xffffff801785f8c0
NullCPUPowerManagement::start
FakeSMCKeyStore: started
AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for AMFI
Security policy loaded: Apple Mobile File Integrity (AMFI)
calling mpo_policy_init for Sanbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Saftey net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1988, 1991, 1993
        The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: sleep states S3 S4 S5
pic (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
[ PCI configuration begin ]
console relocated to 0xfa0000000
[ PCI configuration end, bridges 5, devices 13 ]
FakeSMC v6.11.1328 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.

Also, here are the command line arguments that I am using when I boot:
Code: 
IGPlatformID=01660004, GraphicsEnabler=Yes, IntelCapriFB=4, SkipNvidiaGfx=Yes, dart=0, nv_disable=1 -v -x
Any ideas / suggestions as to what I should do next?
 
Last edited:
Duncan.Britton said:
I will just type out everything that I can see on the screen:
Code: 
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
vm_page_bootstrap: 3033800 free pages and 95544 wired pages; root:xnu-2782.1.97~2/RELEASE_X86_64
vm_page_bootstrap: 3033800 free pages and 95544 wired pages
kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
zone leak detection enabled
"vm_compressor_mode" is 4
multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
standard timeslicing quantum is 10000 us
standard bakcground quantum is 2500 us
mig_table_max_displ = 13
TSC Deadline Timer supported and enabled
SAFE BOOT DETECTED - only valid OSBundleRequired xekts will be loaded.
"name" not a kext
"Kernel-__SYMTAB" not a kext
NullCPUPowerManagement::init: properties=0xffffff801785f8c0
NullCPUPowerManagement::start
FakeSMCKeyStore: started
AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for AMFI
Security policy loaded: Apple Mobile File Integrity (AMFI)
calling mpo_policy_init for Sanbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Saftey net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1988, 1991, 1993
        The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: sleep states S3 S4 S5
pic (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
[ PCI configuration begin ]
console relocated to 0xfa0000000
[ PCI configuration end, bridges 5, devices 13 ]
FakeSMC v6.11.1328 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.

Any ideas / suggestions as to what I should do next?
Click to expand...

What is in your org.chameleon.Boot.plist?

You could try updating FakeSMC. I use my own: https://github.com/RehabMan/OS-X-FakeSMC-kozlek

Did you also add GenericUSBXHCI.kext to the USB? https://github.com/RehabMan/OS-X-Generic-USB3
Did you update VoodooPS2Controller.kext? https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller

Why safe mode? What boot flags are you using?
 
RehabMan said:
What is in your org.chameleon.Boot.plist?

You could try updating FakeSMC. I use my own: https://github.com/RehabMan/OS-X-FakeSMC-kozlek

Did you also add GenericUSBXHCI.kext to the USB? https://github.com/RehabMan/OS-X-Generic-USB3
Did you update VoodooPS2Controller.kext? https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller

Why safe mode? What boot flags are you using?
Click to expand...

  1. How do I edit / view the contents of org.chameleon.Boot.plist?
  2. Okay.
  3. No, I did not.
  4. No, I did not.
 
Duncan.Britton said:
  1. How do I edit / view the contents of org.chameleon.Boot.plist?
Click to expand...


  1. It is at /Extra/org.chameleon.Boot.plist.

    [*]Okay.
    [*]No, I did not.
    [*]No, I did not.
    Click to expand...

    Might be worth it to try. The ones installed by Unibeast are either omitted or not current.
 
here is my
Code: 
org.chameleon.Boot.plist
:

Code: 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Boot Banner</key>
    <string>No</string>
    <key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GraphicsEnabler</key>
    <string>No</string>
    <key>IGPEnabler</key>
    <string>Yes</string>
    <key>Instant Menu</key>
    <string>Yes</string>
    <key>Kernel Flags</key>
    <string>kext-dev-mode=1</string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>UseKernelCache</key>
    <string>No</string>
</dict>
</plist>

I moved your XHCI.kext to the folder where all of the other kext's are located.

EDIT: Exciting things are happening!! After adding your XHCI kext file, many more things scrolled across the console before it finally stopped at something just after the bluetooth controller. There are several errors regarding com.apple.xpc.launchd above it.
 
Last edited:
Duncan.Britton said:
here is my
Code: 
org.chameleon.Boot.plist
:

Code: 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
    <key>Boot Banner</key>
    <string>No</string>
    <key>EthernetBuiltIn</key>
    <string>Yes</string>
    <key>GraphicsEnabler</key>
    <string>No</string>
    <key>IGPEnabler</key>
    <string>Yes</string>
    <key>Instant Menu</key>
    <string>Yes</string>
    <key>Kernel Flags</key>
    <string>kext-dev-mode=1</string>
    <key>Legacy Logo</key>
    <string>Yes</string>
    <key>UseKernelCache</key>
    <string>No</string>
</dict>
</plist>

I moved your XHCI.kext to the folder where all of the other kext's are located.

EDIT: Exciting things are happening!! After adding your XHCI kext file, many more things scrolled across the console before it finally stopped at something just after the bluetooth controller. There are several errors regarding com.apple.xpc.launchd above it.
Click to expand...

Ok, post photo. Probably some sort of graphics issue. What boot flags are you using?
 
I am using the following boot flags:
Code: 
IGPlatformID=01660004 GraphicsEnabler=Yes IntelCapriFB=4 SkipNvidiaGfx=Yes dart=0 nv_disable=1 -v

Could it be that I installed your XHCI.kext in the wrong directory? Where is it supposed to be installed to?

Here is the output on screen when it freezes:
Code: 
Thu Oct 23 17:32:44 2014 localhost com.apple.xpc.launchd[1] <Error>: assertion failed: 14A389: launchd + 181539 [55B9FF-B298-321A-B776-CF7676586C04]: 0x9
Thu Oct 23 17:32:44 2014 localhost com.apple.xpc.launchd[1] (com.apple.notifyd.136) <Warning>: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.system.notification_center
Thu Oct 23 17:32:44 2014 localhost com.apple.xpc.launchd[1] (com.apple.dirhelper.131) <Warning>: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.bsd.dirhelper
Thu Oct 23 17:32:44 2014 localhost com.apple.xpc.launchd[1] <Error>: assertion failed: 14A389: launchd + 23644 [55B9FF23-B298-321A-B776-CF7676586C04]: 0x9
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.syslogd.121) <Warning>: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.system.logger
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.CoreRAID.111) <Warning>: Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.CoreRAID
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.0) <Error>: Could not read path: path = /Library/LaunchAgents, error = 2: No such file or directory
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.secd) <Notice>: This key does not do anything: OnDemand
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.secd) <Error>: This ServiceIPC key is no longer respected. Please remove it.
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.TrustEvaluationAgent) <Notice>: This key does not do anything: OnDemand
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.user.0) <Error>: Failed to booststrap path: path = /Library/LaunchAgents, error = 2. No such file or directory
Thu Oct 23 17:32:45 2014 localhost com.apple.xpc.launchd[1] (com.apple.DataDetectorsDynamicData) <Warning>: The join existing session key is only available to Application services.
Thu Oct 23 17:32:49 2014 localhost com.apple.xpc.launchd[1] (MyListenerSocket) <Error>: No PATH environment variable set. The application firewall will not work with this service.
Thu Oct 23 17:32:49 2014 localhost com.apple.xpc.launchd[1] (MyListenerSocket) <Error>: No PATH environment variable set. The application firewall will not work with this service.
Thu Oct 23 17:32:49 2014 localhost com.apple.xpc.launchd[1] (com.apple.webcontentfilter.dns) <Notice>: This service is defined to be constantly running and is inherently inefficient.

IOGraphics flags 0x43
Previous shutdown cause: 5
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x8800 ****
NVDAStartup: Official
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPowerManagement) timed out
WARNING: IOPlatformOkuginUtil  :  getCPUIDInfo: this is an unknown CPU model 0x3a
    -- power management may be incomplete or unsupported
NVDAGK100HAL loaded and registered
[AGPM Controller] unknown platform
[AGPM Controller] unknown platform
DSMOS has arrived
[IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x8800
[IOBluetoothHCIController][start] -- completed
[IOBluetoothHCIController::setConfigState] calling registerService
**** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x6680 -- 0x5000 -- 0x8800 ****
 
Duncan.Britton said:
I am using the following boot flags:
Code: 
IGPlatformID=01660004 GraphicsEnabler=Yes IntelCapriFB=4 SkipNvidiaGfx=Yes dart=0 nv_disable=1 -v
Click to expand...

You installed Chameleon, did you not? If so, no need for IGPlatformID (as it is specific to Chimera).

Use:
GraphicsEnabler=Yes IntelCapriFB=4 SkipNvidiaGfx=Yes dart=0 nv_disable=1 -v

You could enter some/all of these flags into org.chameleon.Boot.plist also...

The output you provided demonstrates that nv_disable=1 was not used or misspelled.

Could it be that I installed your XHCI.kext in the wrong directory? Where is it supposed to be installed to?
Click to expand...

It goes in /Extra/Extensions on the USB.

Seems like that's where you put it as it got you past the problem...
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top