- Joined
- Feb 26, 2011
- Messages
- 31
- Motherboard
- Asus P6X58D-E
- CPU
- i7-950
- Graphics
- GTX 570
- Mac
- Classic Mac
- Mobile Phone
[Guide] 10.8.3 on Asus P6X58D-E with GeForce GTX 570
Updated for Multibeast 5.2.1 and OS X 10.8.3.
First, go into the BIOS setup and make sure ACPI2.0 and APIC are enabled. Make sure both the Intel and Marvell SATA controllers are in AHCI mode. And make sure suspend mode is set to "S3 only".
Then create the installation USB drive using UniBeast and the 10.8.3 version of Install OS X Mountain Lion.app. Before using the drive, edit the file "Extra/org.chameleon.Boot.plist" located in the drive that was just created, locate "Kernel Flags" and remove the words "PCIRootUID=1" in the next line, as we'll actually need PCIRootUID=0 for the P6X58D-E, which is the default.
After installing OS X 10.8.3 using UniBeast, place the DSDT file for the motherboard on the desktop (I have included a working DSDT.aml for the P6X58D-E in the attached archive.) Then use MultiBeast 5.2.1 to install the following checked options:
In addition, you'll need a kext for the Marvell Yukon 88E8056 Ethernet adapter which is not found in Multibeast. I have included a copy of this kext in the attached archive.
If you are using a GeForce GTX 570 like I am, you can also add the NVDAGF100AGPM kext in the attached archive to enable power management for your GPU. If you are using a different NVIDIA GPU you can still use the kext but you'll have to modify the model number in the Info.plist file.
Finally, if you would like to have a BIOS splash image that looks similar to those on Macs, I have included an image in the attached archive that you can use to replace the default ASUS BIOS splash image. You'll need the ASUS Update program, available for download from ASUS, to do this. This program only runs on Windows. This image is meant for 16x9 screens. It'll look stretched on 4x3 or 8x5 screens.
Updated for Multibeast 5.2.1 and OS X 10.8.3.
First, go into the BIOS setup and make sure ACPI2.0 and APIC are enabled. Make sure both the Intel and Marvell SATA controllers are in AHCI mode. And make sure suspend mode is set to "S3 only".
Then create the installation USB drive using UniBeast and the 10.8.3 version of Install OS X Mountain Lion.app. Before using the drive, edit the file "Extra/org.chameleon.Boot.plist" located in the drive that was just created, locate "Kernel Flags" and remove the words "PCIRootUID=1" in the next line, as we'll actually need PCIRootUID=0 for the P6X58D-E, which is the default.
After installing OS X 10.8.3 using UniBeast, place the DSDT file for the motherboard on the desktop (I have included a working DSDT.aml for the P6X58D-E in the attached archive.) Then use MultiBeast 5.2.1 to install the following checked options:
In addition, you'll need a kext for the Marvell Yukon 88E8056 Ethernet adapter which is not found in Multibeast. I have included a copy of this kext in the attached archive.
If you are using a GeForce GTX 570 like I am, you can also add the NVDAGF100AGPM kext in the attached archive to enable power management for your GPU. If you are using a different NVIDIA GPU you can still use the kext but you'll have to modify the model number in the Info.plist file.
Finally, if you would like to have a BIOS splash image that looks similar to those on Macs, I have included an image in the attached archive that you can use to replace the default ASUS BIOS splash image. You'll need the ASUS Update program, available for download from ASUS, to do this. This program only runs on Windows. This image is meant for 16x9 screens. It'll look stretched on 4x3 or 8x5 screens.