Recent content by JBG

My extern GeForce gives problems too while installing, install is finished and everything is ok now, so I don't know or I place it back, maybe only for reference to the forum here... GL

Hi ed168, I got EXCACTLY the same problem here, only I've used a Gigabyte GA-Z77N-WIFI and a Core i7-2600, Luckily I had another processor and while switching different parts I discovered that it worked with my spare Core i5-3570k (no extern video card used) without any problem and everything...

Hi Angy, I don't use a DSDT at all with Mav at all

Hi Angy82, No problems found here with Mavericks ... Works almost out of the box with some drivers from the last multibeast. Maybe you can try check with power-save off. And try fresh install with no drivers at all, if still have problems then you have to check your hardware (not overclocking...

Hey there kiwisincebirth, Looks great, little complicated electronica to converter PWM, but soon as the day's get shorter and colder I will get back to this hobby soon to take a closer look to it. Arduino, great choice ... ;)

Hi vin, Euhm ... I shared all you needed #1 (I fixed the links) and all tonymacx86-files are here on Software So ... tell me what files you need

Hi there Hans, Not sure, didn't have problems like that... try to use BIOS version 2103 like I have, it may solve your problem (hope so) (and reset BIOS settings to default, or use my settings to try out)

Hey jbartolozzi, My guess is that the disk is to big, and an easy way to test that is with a smaller disk, my biggest disk here is also a 3 tb, but thats in my iomega network disk. Or maybe try to make a smaller partition (or google for it) ;) Good luck and let us know how you get it working...

:lol:

Hi there whiskeynipple ... here's more info http://www.reichelt.nl/Fan-Controllers/E-TEC-01-01-A0-L/3/index.html?;ACTION=3;LA=2;ARTICLE=43328;GROUPID=804;artnr=E-TEC+01+01+A0+L It's a very light and cheap version, there are more type on that site for heaver duty. Easy install and good working...

Hi there Eelhead and thank you too ... (and all others who make this site possible) :headbang:

No problem, just play with Arduino a little if you have the time and a few € or $ to spend there's gonna open a whole new world for you with possibilities .. Have fun :)

No problem Nope ... the schematic I made is using 4 sensors and the software put into the Arduino controls 6 fans (1 in the drive bay, 1 in the PCI room, 2 as front fans controlled by the sensor on the CPU-Cooler, and the last 2 (rear fans) controlled by the sensor behind the CPU-Cooler for...

Hi there Wiskeynipple, Thank you very much, if you mean the schematics of the electronic it's at the end of the first posting (and now here too) :P Original Fan Control G5_V2.fzz.zip It's complete for all tree fans. Just download the .fzz file and open it with http://fritzing.org/download/...

Hi there minihack, No problemo man :P Glad you place a message in my mod cause else I never found your idea :thumbup: And the point is.. Everyone walks his own way, but it's always good too know there other ways too Peace out :headbang: