- Joined
- Nov 5, 2014
- Messages
- 161
- Motherboard
- Gigabyte Z97X-UD3H V1.1-Clover
- CPU
- E3-1231 V3
- Graphics
- HD 7750
- Mobile Phone
The ioreg file is corrupt.
I use the version of a problem, now I can upload a new one.
View attachment MacBook Pro.ioreg
The ioreg file is corrupt.
rm -Rf ~/Downloads/RehabMan
mkdir ~/Downloads/RehabMan
cd ~/Downloads/RehabMan
patchmatic -extract
Download patchmatic: https://github.com/RehabMan/OS-X-MaciASL-patchmatic.
Extract the 'patchmatic' binary from the ZIP. Copy it to /usr/bin, such that you have the binary at /usr/bin/patchmatic.
In terminal,
Code:rm -Rf ~/Downloads/RehabMan mkdir ~/Downloads/RehabMan cd ~/Downloads/RehabMan patchmatic -extract
Post contents of Downloads/RehabMan directory (as ZIP).
Also, post your EFI/Clover/config.plist on your EFI partition.
This is according to your requirement extracted files.
Did you use the guide?
See here: http://www.tonymacx86.com/hp-proboo...-install-yosemite-hp-laptops-clover-uefi.html
I looked very carefully guide and is based on the guidelines for the operation. Yesterday I reinstall it again. My question guide did not mention a similar problem. I installed two HP probook, another one HP 430 g2 is very perfect. This laptop is now appeared to me the question.
If I was in clover in the GUI to set the resolution to 1366x768. Screen does not sleep before restart, the screen will display;
If the wake-sleep reboot screen will appear after the restart screen does not light, there is a working real phenomenon.
Now set the resolution GUI clover is 1024x768, as long as the driver of the graphics (HD4400) to restart the screen does not display.
I have also been a lot of attempts, into a different ig-platform-id. After the long drive normal result is the same.
Looking at your ioreg, I cannot determine where certain things are coming from. And they don't correspond to the config.plist or ACPI files you posted. The config.plist also doesn't appear to come from the ProBook Installer.
For example:
- IGPU device-id in ioreg is 0c26, which is not native for HD4400, yet I find nothing in DSDT/SSDTs/config.plist that is injecting it.
- IGPU ig-platform-id in ioreg is 0a160000, yet same thing here... I find 0xa260006 in config.plist and no overrides in DSDT/SSDT.
So... things don't add up and don't make sense, so I can't help you if you're not giving me accurate information.
Because 0x0a26 memory is 1536Mb, and use 0x0a16 memory is 1024Mb. So I did this to change.
This is ioreg corresponding config.plist file, select Accessories mistake.
You're using 0x0c26.
That was my attempt at injecting a fake id id., But no problem for me now any help.
I took it for a restore, this information would be of.