- Joined
- Aug 7, 2016
- Messages
- 13
- CPU
- Broadwell
- Graphics
- Titan Black
Hey @snookie
first ,
follow the guide.
until they ask to replace the clover config, with the attached config to the guide.
second,
use @metacollin ´s settings at page 3 , be sure to add the kernel patches, exactly like the post. Remember the FakeLPC in Acpi.
third,
add the DSDT File, is from the Supermicro DSDT that @metacollin shared,
put that in the ACPI / patched folder on you're installer USB.
forth,
The kext, i did google all the kexts from the guide from step one, and the OsxAptioFix2Drv-free2000.efi
to get the latest one, ( you will find them )
fifth,
If you are using the internal LSI Raid card, then you must add AstekFusion2Adapter , and AstekFusion2Family kexts.
you can skip this, if you open the HP Machine, and move the SATA Cabels, from the lover line, to the top line next to PCI-E port 5/4
sixth,
Go to HP .com and grab the latest HP Z840 Bios,
install that, and then use the attached HPSetup.txt to change the Bios settings accordingly.
seventh,
you should be able to boot and install now.
----------------------------------- What I'm missing.
1. GFX
Im stuck at Nvidia drivers, because of we are using M4000 and M6000 24 GB, cards, so I belive it´s because of the Nvidia Web Driver, that I get either Black Screen, or panic reboot.
2. Storage
Im missing the PCI-E M.2 Drive ( HP Z Turbo drive).
3. FiberChannel
I have a Attotech FC card in the machine, that does not show, ( it have been used in a MacPro, where it works)
Possible more fun.
I Also attached the origin.zip, this is the DSDT Dump of the HP Z840,
if we can manage to "translate" that, then we should be getting the full power of the HP Z840 in no time.
Where is the AstekFusion2Family kext? I can't find those.
Okay, I've followed all the instructions, and I'm getting a bunch of +++'s and a reboot. An earlier post by @metacollin said that this is caused by not needing OsxAptioFixDrv. I'm not sure if this is referring to "Select OsxAptioFix2Drv-64" from http://www.insanelymac.com/forum/topic/312364-guide-el-capitan-on-asrock-x99e-itxac-using-a-5960x/
I do have broadwell and followed @metacollin post about changing the ID to look for in the CPU. But that's where I'm stuck.