- Joined
- Jul 18, 2012
- Messages
- 40
- Motherboard
- Clover Probook 4530s F.60 BIOS
- CPU
- intel core i7 2670QM @2.2Ghz
- Graphics
- HD 3000 1366 x 768
- Mac
- Classic Mac
- Mobile Phone
After many failed attempts at installing 10.10, 10.9 with no success I have reverted back to 10.8 but PBI fails to complete
As mentioned in title I have installed/uninstalled all 3 versions on my 4530s both 10.10 and 10.9 with clover and now I've gone back to 10.8.5 with unibeast.
I am discussing ML 10.8.5 here which I currently have installed!!
The install goes smooth, no boot flags needed to run the install from USB but after re-boot -v -x are required or it hangs just after the verbose screen when you think language select screen is going to appear but just stays white with the pointer stuck in the top left corner.
I currently have wifi and battery status working, the correct time showing and dvd drive recognised
No sound or boot loader.
Once into hdd with -v -x and selecting the following in PBI 6.1.13r3
Osx support kexts 4x30s
same 4x30s generic options were applicable DSDT..
SSDT gen
Atheros 9285 wifi
Chameleon
system defs I selected SB quad core i7 (mine is 2670qm 2.2ghz)
but PBI sets defs to 2860qm 2.5 ghz?? Is this the problem?
It has installed a DSDT,boot.plist and smbios in Extra but I am unsure if they are complete or edited correctly
as the PBI threw up Installation Failed then straight after I get a kernal panic
Now on re boot no boot loader is installed.
boot from USB with -v -f -x the things I mentioned before are working
about this mac is now showing intel quad xeon 2.2ghz.
I am going to ren PBI again and select boot loader only
I will attach all files I think may be of use to anyone who wants to be a legend and help me out of this pickle.
As mentioned in title I have installed/uninstalled all 3 versions on my 4530s both 10.10 and 10.9 with clover and now I've gone back to 10.8.5 with unibeast.
I am discussing ML 10.8.5 here which I currently have installed!!
The install goes smooth, no boot flags needed to run the install from USB but after re-boot -v -x are required or it hangs just after the verbose screen when you think language select screen is going to appear but just stays white with the pointer stuck in the top left corner.
I currently have wifi and battery status working, the correct time showing and dvd drive recognised
No sound or boot loader.
Once into hdd with -v -x and selecting the following in PBI 6.1.13r3
Osx support kexts 4x30s
same 4x30s generic options were applicable DSDT..
SSDT gen
Atheros 9285 wifi
Chameleon
system defs I selected SB quad core i7 (mine is 2670qm 2.2ghz)
but PBI sets defs to 2860qm 2.5 ghz?? Is this the problem?
It has installed a DSDT,boot.plist and smbios in Extra but I am unsure if they are complete or edited correctly
as the PBI threw up Installation Failed then straight after I get a kernal panic
Now on re boot no boot loader is installed.
boot from USB with -v -f -x the things I mentioned before are working
about this mac is now showing intel quad xeon 2.2ghz.
I am going to ren PBI again and select boot loader only
I will attach all files I think may be of use to anyone who wants to be a legend and help me out of this pickle.