Contribute
Register

BCM94352Z Weird Problem on both Windows & Mac

Status
Not open for further replies.
iPlayGuitar

iPlayGuitar

Joined
Jan 9, 2015
Messages
336
Motherboard
Lenovo Y50-70
CPU
i7-4710HQ 2.5GHz Haswell
Graphics
Intel HD 4600 / nVidia GeForce 860m 4GB
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. iOS
Ok, so I'm having a weird problem with my newly installed BCM94352Z.

It used to work fine without any problems but now It's acting all weird.


It won't connect to any network (tested two, one at a friends house and my iPhone Hotspot) except my home network.

On OS X it says "Connection Timeout" and on Windows "Cannot connect to the Network" (or something like that).

Sometimes, through many restarts and pulling the Wi-Fi card out and putting it back in maybe it will connect to a network, works for a few seconds and then drops the connection.

When I put the old Intel Card back in it works without any problem.
When I want to connect to my home network it works instantly, on both Mac and Windows.

NOTE: I have 2 versions of the Network, one 5GHz and one normal. I used to connect to the normal but but after I created a special 5GHz version I started using that one (this IS NOT when the problem started). I tried connect to the normal one but it just hangs, no errors but it just never connects.


I saw many threads regarding this (especially Yosemite) but my problem is in BOTH OS's.

Note: The black wire (for the antennas) is longer than the white wire and on the Intel card the position is Black, White. On the BCM its White, Black. Since the White wire is so short they may have touched at some point (I'm sure they were touching, but it was still working, both Mac and Windows).


Could my card be damaged ?
I'm asking this since yeah, it works with ONE network (and works without ANY sort of problems) it wont work with another network, on ANY OS. The ANY OS part is what scares me, I hope it's not a card problem.


Note: I ran some diagnostics on mac and I had 3 possibilities (but I dont know if they are even related to my case or just random advice) saying something about country code (that's when I tried connecting to my iPhone Hotspot).

Networks Involved:

My Network 5GHz (works without any sort of problem in both os's)
My Network ( takes some time and at the end It can't connect to it)
iPhone Hotspot (Connection Timeout on Mac and on Windows it connects for a second, the iPhone shows 1 Device Connected and then it disconnects immediatly)
Friends Home Network (Connection Timeout on Mac and Can't Connect to the Network on Windows)

Im inclined to say the card is damaged but why does it work without ANY sort of problems with my home network and why was it working with all the networks in the past ?


Can anyone help ? Thanks !
 
iPlayGuitar said:
Ok, so I'm having a weird problem with my newly installed BCM94352Z.

It used to work fine without any problems but now It's acting all weird.


It won't connect to any network (tested two, one at a friends house and my iPhone Hotspot) except my home network.

On OS X it says "Connection Timeout" and on Windows "Cannot connect to the Network" (or something like that).

Sometimes, through many restarts and pulling the Wi-Fi card out and putting it back in maybe it will connect to a network, works for a few seconds and then drops the connection.

When I put the old Intel Card back in it works without any problem.
When I want to connect to my home network it works instantly, on both Mac and Windows.

NOTE: I have 2 versions of the Network, one 5GHz and one normal. I used to connect to the normal but but after I created a special 5GHz version I started using that one (this IS NOT when the problem started). I tried connect to the normal one but it just hangs, no errors but it just never connects.


I saw many threads regarding this (especially Yosemite) but my problem is in BOTH OS's.

Note: The black wire (for the antennas) is longer than the white wire and on the Intel card the position is Black, White. On the BCM its White, Black. Since the White wire is so short they may have touched at some point (I'm sure they were touching, but it was still working, both Mac and Windows).


Could my card be damaged ?
I'm asking this since yeah, it works with ONE network (and works without ANY sort of problems) it wont work with another network, on ANY OS. The ANY OS part is what scares me, I hope it's not a card problem.


Note: I ran some diagnostics on mac and I had 3 possibilities (but I dont know if they are even related to my case or just random advice) saying something about country code (that's when I tried connecting to my iPhone Hotspot).

Networks Involved:

My Network 5GHz (works without any sort of problem in both os's)
My Network ( takes some time and at the end It can't connect to it)
iPhone Hotspot (Connection Timeout on Mac and on Windows it connects for a second, the iPhone shows 1 Device Connected and then it disconnects immediatly)
Friends Home Network (Connection Timeout on Mac and Can't Connect to the Network on Windows)

Im inclined to say the card is damaged but why does it work without ANY sort of problems with my home network and why was it working with all the networks in the past ?


Can anyone help ? Thanks !
Click to expand...

What method are you using to enable the card on Yosemite?

Does the problem occur in Windows after an EC reset/cold start?
 
RehabMan said:
What method are you using to enable the card on Yosemite?

Does the problem occur in Windows after an EC reset/cold start?
Click to expand...

So I opened the case, detached the battery, pressed the power button for like 30 seconds to consume all the power, waited 5-7 minutes and attached the battery. I assume that's an EC Reset.

Still the same problem. The laptop won't connect to another network except the 5GHz one. I can't test it with another 5Ghz since I dont have 2 routers.

On OS X I use FakePCIID BCM4352Z as xxxx ( can't remember the numbers ) and the bcmrampatch for bluetooth.

I have seen a thread on the Apple forum with people that can ONLY connect to 5GHz networks, but I can't find it now.


I find it logical to be a OS problem, but it happens on both. So ok, router problem, but all my devices work with it (it's an airport extreme) and the laptop can't connect to other router and my iPhone hotspot.

If I just put the old card back it works with no problem (however only on windows since OS X doesn't support Intel).

If it matters my Intel card has some pins covered and some pins cut off. This would've mattered IF my card didn't work right from the start. But it did, it worked with my normal network (not the 5GHz one).


I read threads and no one can say that a card that connects to a network and connects to the internet using that network is faulty or damaged.

Weird....
 
iPlayGuitar said:
So I opened the case, detached the battery, pressed the power button for like 30 seconds to consume all the power, waited 5-7 minutes and attached the battery. I assume that's an EC Reset.

Still the same problem. The laptop won't connect to another network except the 5GHz one. I can't test it with another 5Ghz since I dont have 2 routers.

On OS X I use FakePCIID BCM4352Z as xxxx ( can't remember the numbers ) and the bcmrampatch for bluetooth.

I have seen a thread on the Apple forum with people that can ONLY connect to 5GHz networks, but I can't find it now.


I find it logical to be a OS problem, but it happens on both. So ok, router problem, but all my devices work with it (it's an airport extreme) and the laptop can't connect to other router and my iPhone hotspot.

If I just put the old card back it works with no problem (however only on windows since OS X doesn't support Intel).

If it matters my Intel card has some pins covered and some pins cut off. This would've mattered IF my card didn't work right from the start. But it did, it worked with my normal network (not the 5GHz one).


I read threads and no one can say that a card that connects to a network and connects to the internet using that network is faulty or damaged.

Weird....
Click to expand...

Could be regdomain/locale issue... Or just some sort of hardware incompatibility/router setup problem.
 
RehabMan said:
Could be regdomain/locale issue... Or just some sort of hardware incompatibility/router setup problem.
Click to expand...

How can I fix this ?

Can you point me to a trustworthy guide ?

It works with my Intel card and it worked before with this card so I don't think it's that.

Hardware incompatibility ? What are you referring to ?
 
iPlayGuitar said:
How can I fix this ?

Can you point me to a trustworthy guide ?
Click to expand...

I don't know of one dealing with regdomain issues with BCM WiFi.

It works with my Intel card and it worked before with this card so I don't think it's that.
The regdomain is programmed into EEPROM (at least with Atheros). I don't know the details of BCM. My BCM94352HMB is working fine with 5Ghz and all the routers I've tried, so no need to look into it.

Hardware incompatibility ? What are you referring to ?
Click to expand...

Incompatibility with card/firmware and the particular router (or router configuration). You say it works with some, but not others... and the problem appears to be OS agnostic... which points to a difference in the configuration of each... It is not uncommon.
Click to expand...
Click to expand...
 
The regdomain is programmed into EEPROM (at least with Atheros). I don't know the details of BCM. My BCM94352HMB is working fine with 5Ghz and all the routers I've tried, so no need to look into it.



Incompatibility with card/firmware and the particular router (or router configuration). You say it works with some, but not others... and the problem appears to be OS agnostic... which points to a difference in the configuration of each... It is not uncommon.[/quote]

It doesnt even work with 2 different networks on the same router. It won't connect to my non 5Ghz network but it connects to the 5Ghz one.
 
iPlayGuitar said:
...
It doesnt even work with 2 different networks on the same router. It won't connect to my non 5Ghz network but it connects to the 5Ghz one.
Click to expand...

Is that the case on Windows after EC reset and cold boot into only Windows?

If so, points to a hardware issue...
 
RehabMan said:
Is that the case on Windows after EC reset and cold boot into only Windows?

If so, points to a hardware issue...
Click to expand...


Yeah, Uninstall drivers, EC Reset, Reinstall drivers.

It won't work with the non 5ghz connection of my router.

I tried connecting the iPhone hotspot through bluetooth and it works. When I try to connect to the iPhone through the wireless network it doesnt. Note that this is all on Windows. Im trying to fix it on windows since it would be more simple and there are drivers written for this device for windows and not os x.

Maybe this will help :

Code: 
Wireless System Information Summary
(Time: 3/5/2015 10:29:41 AM GTB Standard Time)




======================================================================= 
============================== SHOW DRIVERS =========================== 
=======================================================================




Interface name: Wi-Fi


    Driver                    : Broadcom 802.11ac Network Adapter
    Vendor                    : Broadcom
    Provider                  : Broadcom
    Date                      : 9/6/2013
    Version                   : 6.30.223.170
    INF file                  : C:\Windows\INF\oem1.inf
    Files                     : 4 total
                                C:\Windows\system32\DRIVERS\BCMWL63a.SYS
                                C:\Windows\system32\bcmihvsrv64.dll
                                C:\Windows\system32\bcmihvui64.dll
                                C:\Windows\system32\drivers\vwifibus.sys
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11ac 802.11a 802.11n 802.11g 802.11b
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : Yes
    Hosted network supported  : Yes
    Authentication and cipher supported in infrastructure mode:
                                Open            None
                                Open            WEP
                                WPA2-Enterprise TKIP
                                WPA2-Personal   TKIP
                                WPA2-Enterprise CCMP
                                WPA2-Personal   CCMP
                                WPA-Enterprise  TKIP
                                WPA-Personal    TKIP
                                WPA-Enterprise  CCMP
                                WPA-Personal    CCMP
    Authentication and cipher supported in ad-hoc mode:
                                WPA2-Personal   CCMP
                                Open            None
                                Open            WEP
    IHV service present       : Yes
    IHV adapter OUI           : [00 10 18], type: [00]
    IHV extensibility DLL path: C:\Windows\System32\bcmihvsrv64.dll
    IHV UI extensibility ClSID: {aaa6dee9-31b9-4f18-ab39-82ef9b06eb73}
    IHV diagnostics CLSID     : {00000000-0000-0000-0000-000000000000}




======================================================================= 
============================= SHOW INTERFACES ========================= 
=======================================================================




There is 1 interface on the system: 


    Name                   : Wi-Fi
    Description            : Broadcom 802.11ac Network Adapter
    GUID                   : d6579c6e-920d-4001-93a6-34fd1043f5aa
    Physical address       : 24:fd:52:b6:9f:56
    State                  : connected
    SSID                   : ba nu mai furati net 5GHz
    BSSID                  : 00:24:36:ae:10:9e
    Network type           : Infrastructure
    Radio type             : 802.11n
    Authentication         : Open
    Cipher                 : None
    Connection mode        : Profile
    Channel                : 100
    Receive rate (Mbps)    : 300
    Transmit rate (Mbps)   : 300
    Signal                 : 90% 
    Profile                : ba nu mai furati net 5GHz 


    Hosted network status  : Not available




======================================================================= 
=========================== SHOW HOSTED NETWORK ======================= 
=======================================================================




Hosted network settings 
----------------------- 
    Mode                   : Allowed
    Settings               : <Not configured>


Hosted network status   
--------------------- 
    Status                 : Not available




======================================================================= 
============================= SHOW SETTINGS =========================== 
=======================================================================




Wireless LAN settings 
--------------------- 
    Show blocked networks in visible network list: No


    Only use GP profiles on GP-configured networks: No


    Hosted network mode allowed in WLAN service: Yes


    Allow shared user credentials for network authentication: Yes


    Block period: Not Configured.


    Auto configuration logic is enabled on interface "Wi-Fi"




======================================================================= 
============================== SHOW FILTERS =========================== 
=======================================================================




Allow list on the system (group policy) 
--------------------------------------- 
    <None>


Allow list on the system (user) 
------------------------------- 
    <None>


Block list on the system (group policy) 
--------------------------------------- 
    <None>


Block list on the system (user) 
------------------------------- 
    <None>




======================================================================= 
=========================== SHOW CREATEALLUSER ======================== 
=======================================================================




Everyone is allowed to create all user profiles.




======================================================================= 
============================= SHOW PROFILES =========================== 
=======================================================================




Profiles on interface Wi-Fi:


Group policy profiles (read only)
---------------------------------
    <None>


User profiles
-------------
    All User Profile     : ba nu mai furati net 5GHz




======================================================================= 
========================== SHOW PROFILES NAME=* ======================= 
=======================================================================




Profile ba nu mai furati net 5GHz on interface Wi-Fi: 
======================================================================= 


Applied: All User Profile    


Profile information 
------------------- 
    Version                : 1
    Type                   : Wireless LAN
    Name                   : ba nu mai furati net 5GHz
    Control options        : 
        Connection mode    : Connect manually
        Network broadcast  : Connect only if this network is broadcasting
        AutoSwitch         : Do not switch to other networks


Connectivity settings 
--------------------- 
    Number of SSIDs        : 1
    SSID name              : "ba nu mai furati net 5GHz"
    Network type           : Infrastructure
    Radio type             : [ Any Radio Type ]
    Vendor extension          : Not present


Security settings 
----------------- 
    Authentication         : Open
    Cipher                 : None
    Security key           : Absent
    Key Index              : 1


Cost settings 
------------- 
    Cost                   : Unrestricted
    Congested              : No
    Approaching Data Limit : No
    Over Data Limit        : No
    Roaming                : No
    Cost Source            : Default




======================================================================= 
======================= SHOW NETWORKS MODE=BSSID ====================== 
=======================================================================


 
Interface name : Wi-Fi 
There are 5 networks currently visible. 


SSID 1 : cntr
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : a0:f3:c1:47:81:2c
         Signal             : 60%  
         Radio type         : 802.11n
         Channel            : 11 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54


SSID 2 : ba nu mai furati net
    Network type            : Infrastructure
    Authentication          : Open
    Encryption              : None 
    BSSID 1                 : 00:24:36:ae:10:9d
         Signal             : 93%  
         Radio type         : 802.11n
         Channel            : 1 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54


SSID 3 : internet
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : 06:24:36:ae:10:9d
         Signal             : 95%  
         Radio type         : 802.11n
         Channel            : 1 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54
    BSSID 2                 : 06:24:36:ae:10:9e
         Signal             : 91%  
         Radio type         : 802.11n
         Channel            : 100 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54


SSID 4 : Seth's iPhone
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : 62:b3:95:5e:6e:bc
         Signal             : 80%  
         Radio type         : 802.11n
         Channel            : 2 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54


SSID 5 : ba nu mai furati net 5GHz
    Network type            : Infrastructure
    Authentication          : Open
    Encryption              : None 
    BSSID 1                 : 00:24:36:ae:10:9e
         Signal             : 91%  
         Radio type         : 802.11n
         Channel            : 100 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54


Wireless System Information Summary
(Time: 3/5/2015 10:30:41 AM GTB Standard Time)




======================================================================= 
============================== SHOW DRIVERS =========================== 
=======================================================================




Interface name: Wi-Fi


    Driver                    : Broadcom 802.11ac Network Adapter
    Vendor                    : Broadcom
    Provider                  : Broadcom
    Date                      : 9/6/2013
    Version                   : 6.30.223.170
    INF file                  : C:\Windows\INF\oem1.inf
    Files                     : 4 total
                                C:\Windows\system32\DRIVERS\BCMWL63a.SYS
                                C:\Windows\system32\bcmihvsrv64.dll
                                C:\Windows\system32\bcmihvui64.dll
                                C:\Windows\system32\drivers\vwifibus.sys
    Type                      : Native Wi-Fi Driver
    Radio types supported     : 802.11ac 802.11a 802.11n 802.11g 802.11b
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : Yes
    Hosted network supported  : Yes
    Authentication and cipher supported in infrastructure mode:
                                Open            None
                                Open            WEP
                                WPA2-Enterprise TKIP
                                WPA2-Personal   TKIP
                                WPA2-Enterprise CCMP
                                WPA2-Personal   CCMP
                                WPA-Enterprise  TKIP
                                WPA-Personal    TKIP
                                WPA-Enterprise  CCMP
                                WPA-Personal    CCMP
    Authentication and cipher supported in ad-hoc mode:
                                WPA2-Personal   CCMP
                                Open            None
                                Open            WEP
    IHV service present       : Yes
    IHV adapter OUI           : [00 10 18], type: [00]
    IHV extensibility DLL path: C:\Windows\System32\bcmihvsrv64.dll
    IHV UI extensibility ClSID: {aaa6dee9-31b9-4f18-ab39-82ef9b06eb73}
    IHV diagnostics CLSID     : {00000000-0000-0000-0000-000000000000}




======================================================================= 
============================= SHOW INTERFACES ========================= 
=======================================================================




There is 1 interface on the system: 


    Name                   : Wi-Fi
    Description            : Broadcom 802.11ac Network Adapter
    GUID                   : d6579c6e-920d-4001-93a6-34fd1043f5aa
    Physical address       : 24:fd:52:b6:9f:56
    State                  : connected
    SSID                   : ba nu mai furati net 5GHz
    BSSID                  : 00:24:36:ae:10:9e
    Network type           : Infrastructure
    Radio type             : 802.11n
    Authentication         : Open
    Cipher                 : None
    Connection mode        : Profile
    Channel                : 100
    Receive rate (Mbps)    : 300
    Transmit rate (Mbps)   : 300
    Signal                 : 90% 
    Profile                : ba nu mai furati net 5GHz 


    Hosted network status  : Not available




======================================================================= 
=========================== SHOW HOSTED NETWORK ======================= 
=======================================================================




Hosted network settings 
----------------------- 
    Mode                   : Allowed
    Settings               : <Not configured>


Hosted network status   
--------------------- 
    Status                 : Not available




======================================================================= 
============================= SHOW SETTINGS =========================== 
=======================================================================




Wireless LAN settings 
--------------------- 
    Show blocked networks in visible network list: No


    Only use GP profiles on GP-configured networks: No


    Hosted network mode allowed in WLAN service: Yes


    Allow shared user credentials for network authentication: Yes


    Block period: Not Configured.


    Auto configuration logic is enabled on interface "Wi-Fi"




======================================================================= 
============================== SHOW FILTERS =========================== 
=======================================================================




Allow list on the system (group policy) 
--------------------------------------- 
    <None>


Allow list on the system (user) 
------------------------------- 
    <None>


Block list on the system (group policy) 
--------------------------------------- 
    <None>


Block list on the system (user) 
------------------------------- 
    <None>




======================================================================= 
=========================== SHOW CREATEALLUSER ======================== 
=======================================================================




Everyone is allowed to create all user profiles.




======================================================================= 
============================= SHOW PROFILES =========================== 
=======================================================================




Profiles on interface Wi-Fi:


Group policy profiles (read only)
---------------------------------
    <None>


User profiles
-------------
    All User Profile     : ba nu mai furati net 5GHz




======================================================================= 
========================== SHOW PROFILES NAME=* ======================= 
=======================================================================




Profile ba nu mai furati net 5GHz on interface Wi-Fi: 
======================================================================= 


Applied: All User Profile    


Profile information 
------------------- 
    Version                : 1
    Type                   : Wireless LAN
    Name                   : ba nu mai furati net 5GHz
    Control options        : 
        Connection mode    : Connect manually
        Network broadcast  : Connect only if this network is broadcasting
        AutoSwitch         : Do not switch to other networks


Connectivity settings 
--------------------- 
    Number of SSIDs        : 1
    SSID name              : "ba nu mai furati net 5GHz"
    Network type           : Infrastructure
    Radio type             : [ Any Radio Type ]
    Vendor extension          : Not present


Security settings 
----------------- 
    Authentication         : Open
    Cipher                 : None
    Security key           : Absent
    Key Index              : 1


Cost settings 
------------- 
    Cost                   : Unrestricted
    Congested              : No
    Approaching Data Limit : No
    Over Data Limit        : No
    Roaming                : No
    Cost Source            : Default




======================================================================= 
======================= SHOW NETWORKS MODE=BSSID ====================== 
=======================================================================


 
Interface name : Wi-Fi 
There are 5 networks currently visible. 


SSID 1 : cntr
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : a0:f3:c1:47:81:2c
         Signal             : 60%  
         Radio type         : 802.11n
         Channel            : 11 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54


SSID 2 : ba nu mai furati net
    Network type            : Infrastructure
    Authentication          : Open
    Encryption              : None 
    BSSID 1                 : 00:24:36:ae:10:9d
         Signal             : 93%  
         Radio type         : 802.11n
         Channel            : 1 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54


SSID 3 : internet
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : 06:24:36:ae:10:9d
         Signal             : 95%  
         Radio type         : 802.11n
         Channel            : 1 
         Basic rates (Mbps) : 1 2 5.5 11
         Other rates (Mbps) : 6 9 12 18 24 36 48 54
    BSSID 2                 : 06:24:36:ae:10:9e
         Signal             : 91%  
         Radio type         : 802.11n
         Channel            : 100 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54


SSID 4 : Seth's iPhone
    Network type            : Infrastructure
    Authentication          : WPA2-Personal
    Encryption              : CCMP 
    BSSID 1                 : 62:b3:95:5e:6e:bc
         Signal             : 80%  
         Radio type         : 802.11n
         Channel            : 2 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54


SSID 5 : ba nu mai furati net 5GHz
    Network type            : Infrastructure
    Authentication          : Open
    Encryption              : None 
    BSSID 1                 : 00:24:36:ae:10:9e
         Signal             : 91%  
         Radio type         : 802.11n
         Channel            : 100 
         Basic rates (Mbps) : 6 12 24
         Other rates (Mbps) : 9 18 36 48 54




SERVICE_NAME: dhcp 
        TYPE               : 20  WIN32_SHARE_PROCESS  
        STATE              : 4  RUNNING 
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0  (0x0)
        SERVICE_EXIT_CODE  : 0  (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0


SERVICE_NAME: dnscache 
        TYPE               : 20  WIN32_SHARE_PROCESS  
        STATE              : 4  RUNNING 
                                (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN)
        WIN32_EXIT_CODE    : 0  (0x0)
        SERVICE_EXIT_CODE  : 0  (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0


SERVICE_NAME: wlansvc 
        TYPE               : 20  WIN32_SHARE_PROCESS  
        STATE              : 4  RUNNING 
                                (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
        WIN32_EXIT_CODE    : 0  (0x0)
        SERVICE_EXIT_CODE  : 0  (0x0)
        CHECKPOINT         : 0x0
        WAIT_HINT          : 0x0


Windows IP Configuration


   Host Name . . . . . . . . . . . . : SethVanity-PC
   Primary Dns Suffix  . . . . . . . : 
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No


Ethernet adapter Bluetooth Network Connection:


   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 24-FD-52-8D-E5-84
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes


Wireless LAN adapter Local Area Connection* 3:


   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #3
   Physical Address. . . . . . . . . : 26-FD-52-B6-9F-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes


Wireless LAN adapter Wi-Fi:


   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Broadcom 802.11ac Network Adapter
   Physical Address. . . . . . . . . : 24-FD-52-B6-9F-56
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::25d0:da5d:cf7:7cc7%20(Preferred) 
   IPv4 Address. . . . . . . . . . . : 10.0.1.8(Preferred) 
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, March 5, 2015 10:23:25 AM
   Lease Expires . . . . . . . . . . : Friday, March 6, 2015 10:23:25 AM
   Default Gateway . . . . . . . . . : 10.0.1.1
   DHCP Server . . . . . . . . . . . : 10.0.1.1
   DHCPv6 IAID . . . . . . . . . . . : 337968466
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1C-43-F8-05-F0-76-1C-1E-E8-F8
   DNS Servers . . . . . . . . . . . : 10.0.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled


Ethernet adapter Ethernet:


   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
   Physical Address. . . . . . . . . : F0-76-1C-1E-E8-F8
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes


Tunnel adapter isatap.{D6579C6E-920D-4001-93A6-34FD1043F5AA}:


   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : 
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes


Global Settings: 
----------------------------------------------------------------------
IPsec:
StrongCRLCheck                        0:Disabled
SAIdleTimeMin                         5min
DefaultExemptions                     NeighborDiscovery,DHCP
IPsecThroughNAT                       Never
AuthzUserGrp                          None
AuthzComputerGrp                      None
AuthzUserGrpTransport                 None
AuthzComputerGrpTransport             None


StatefulFTP                           Enable
StatefulPPTP                          Enable


Main Mode:
KeyLifetime                           480min,0sess
SecMethods                            DHGroup2-AES128-SHA1,DHGroup2-3DES-SHA1
ForceDH                               No


Categories:
BootTimeRuleCategory                  Windows Firewall
FirewallRuleCategory                  Windows Firewall
StealthRuleCategory                   Windows Firewall
ConSecRuleCategory                    Windows Firewall


Ok.




Current WinHTTP proxy settings:


    Direct access (no proxy server).
 
iPlayGuitar said:
Yeah, Uninstall drivers, EC Reset, Reinstall drivers.

It won't work with the non 5ghz connection of my router.

I tried connecting the iPhone hotspot through bluetooth and it works. When I try to connect to the iPhone through the wireless network it doesnt. Note that this is all on Windows. Im trying to fix it on windows since it would be more simple and there are drivers written for this device for windows and not os x.
Click to expand...

I think you have a hardware problem.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top