Zotac H67 ITX nullcpupowermanagement problem

[boumbo]

Hi everyone,
i recently bought a zotac h67 itx mainboard with a i5 2500K for making a mod project.
I used before an zotac h55 itx that worked great with all dsdt fixes (unfortunately no intel hd graphic support but i read the tonymacx86 thread about the hd3000 support on lion;-))
anyway, back to my h67 itx mainboard, it work great (network ,audio, (no usb3.0 beacause vli chipset not a nec like the h55 itx)etc.

Now i try to remove the maximum of kext in extra folder with modify my dsdt.
without the nullintelcpupowermanagement.kext i 've got (of course) a kernel panic; so i made the dsdt fix for it (In HPET , STA--> return 0X0f and CRS--> Return ATT3) and then no kernel panic screen ( i have the apple grey screen and the wheel is here) but in verbose mod, i have a kernel panic with the intelcpupowermanagement.kext , (CPU0)........ 4 potential args on the stack.

I tought that it was about the CPU aliases in the dsdt but in my dsdt , i haven't the lines:
"Processor (P001, 0x08, 0x0000000....etc" and in the SCOPE (PR) i have just the SSDT parameters but no signs of aliases.

And when i boot with the iboot CD and run my Macintosh HD it work perfectly

could you help me, i 'am totaly lost

 

[boumbo]

Hi,
anybody could help me or it is because everyone is on holiday,
laying on the beach and burning his skin ;-) ?

 

[boumbo]

Hi
problem solved, this zotac motherboard need an AppleIntelCPUPowerManagement.kext patched with this script: http://www.insanelymac.com/forum/index.php?showtopic=258611

The Original DSDT of the motherboard is HPET fixed out of the box

And one more thing, we need to customize the smbios to fix kernel panic with the IMac 12,1 or 12,2
and then it works well , appleLPC.kext loaded without any dsdt fix, P-states work without any dsdt fix .Only C-states are not loaded need DSDT fix.

hope that could help some people

 

[tetsu81vn]

Hi, Can You guide how to install Lion on zotac itx h67 , core i3 2100 ? I installed Lion by USB stick, after install, can't boot into Lion by iboot, stuck at Apple gray screen and wheel, loacding forever, no hdd activity.

Which setting did you use, steps to install on zotac itx h67

 

[chalkie1975]

I have installed Lion and got it working on this motherboard.
I have a Kingston 64GB SDD, Zotac H67 motherboard with onboard graphics, and a Core i7 unlocked processor.
I used the online guide (google it) to create a bootable usb key with chameleon latest build. (hacking the install .dmg and extracting base system and copying over packages folder).
You definitely need nullcpupowermangement (to begin with) and it works out of the box with no usb 3, hd audio and basic graphics. no networking either, although i've found various guides about how to get these all to work. (mostly)

http://tuxie.wordpress.com/2011/04/15/stable-hackintosh-with-h67-chipset/
http://www.tonymacx86.com/viewforum.php?f=79
http://www.tonymacx86.com/wiki/index.php/IBoot_+_Multibeast_Component_Builds
(bottom of page)
http://www.insanelymac.com/forum/index.php?showtopic=205771&pid=1471933&mode=threaded&start=


I'm a newbie to this forum but have been using a mackintosh since 10.5 and gone through each update and been quite successful.

I found that for this motherboard, you have to tweak the bios to give you the things you need. How do i export what my bios settings are?

 

[tetsu81vn]

Thanks to all so much ! I installed successful to my zotac h67. Main problem is : AppleIntelCPUPowerManagement.kext --> this must be pathced by speedstepper .

I'm current on 10.6.8 with full qe/ci (parkle gt430).

I'll install lion , will post back the result.

My System is :

Zotac itx h67 wifi revision c/e
8GB (2x4GB) Gskill 1333Mhz
Hdd 1TB Samsung spintpoint 1 (got failed install to WD 2TB sata 3 hdd , so quick to samsung hdd)
Sparkle GT430 1Gb

 

[tetsu81vn]

Installed successful Lion 10.7.0 with full qe/ci /OpenGL acceleration . I'' will try to upgrade to 10.7.1.

Here is my build :http://www.tonymacx86.com/viewtopic.php?f=54&t=29696