Yosemite Install Freezes

[JElgar]

I am currently trying to install Yosemite onto my PC. I have been unsuccessful many times with the install and was hoping someone could help!

The closest I have got to a successful install so far is when I ran the install on internal graphics with the flags:
PCIRootUID=1 GraphicsEnabler=No IGPEnabler=Yes ncpi=0x3000 dart=0

I got as far as the install stage, and it froze with about 8 minutes remaining...
Any help would be greatly appreciated!
Thanks in advance
James

 

[cmn699]

I am currently trying to install Yosemite onto my PC. I have been unsuccessful many times with the install and was hoping someone could help!

The closest I have got to a successful install so far is when I ran the install on internal graphics with the flags:
PCIRootUID=1 GraphicsEnabler=No IGPEnabler=Yes ncpi=0x3000 dart=0

I got as far as the install stage, and it froze with about 8 minutes remaining...
Any help would be greatly appreciated!
Thanks in advance
James

May be you could try enabling your Video card in the BIOS setup instead of Boot flag:

1. Force reboot and access the BIOS

• Load Optimized Defaults.
• Go to Peripherals Menu
• Scroll down to :
  Initial Display Output
  
  Instead of IGFX select
  .
  
  PCIe 1 Slot
  
  Sets the graphics card on the PCIEX16 slot as the first display
  . (Default)
  if that is the slot you have installed your Graphic card

Hope this helps.