The device root uuid is on Asus UX303LA (Broadwell)

[RehabMan]

Hi!
I didn't know about the early fix that RehabMan posted. I needed Yosemite quickly so I use it under VM Ware.

I'll try to install it someday soon.

Not sure what "early fix" you're referring to, but if you're referring to the patch for early reboot in the kernel XCPM power management code caused by locked MSR 0xE2... there is no need with Clover. Just set config.plist/KernelAndKextPatches/KernelPm=true. Clover has my patch built-in when you use that flag.

 

[matejjelic]

Not sure what "early fix" you're referring to, but if you're referring to the patch for early reboot in the kernel XCPM power management code caused by locked MSR 0xE2... there is no need with Clover. Just set config.plist/KernelAndKextPatches/KernelPm=true. Clover has my patch built-in when you use that flag.

Sorry, i meant early reboot fix.
I will try to boot with te KernelPm=true flag anytime soon.
Thank you!

 

[RehabMan]

Sorry, i meant early reboot fix.
I will try to boot with te KernelPm=true flag anytime soon.
Thank you!

Start with config.plist from guide: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

Use the HD5000 config.plist as it has no FakeID or other injections.

You'll need to do some research on enabling Broadwell graphics. See here for early work: http://www.tonymacx86.com/yosemite-laptop-support/161591-intel-hd-graphics-5500-need-some-help.html

 

[frizinko]

Start with config.plist from guide: http://www.tonymacx86.com/yosemite-...oting-os-x-installer-laptops-clover-uefi.html

Use the HD5000 config.plist as it has no FakeID or other injections.

You'll need to do some research on enabling Broadwell graphics. See here for early work: http://www.tonymacx86.com/yosemite-laptop-support/161591-intel-hd-graphics-5500-need-some-help.html

I followed your guide and got a little further, now I got stuck at ACPI:
I also read the "Intel HD Graphics 5500 - Need some help" but I really don't understand much whats written there

 

[RehabMan]

I followed your guide and got a little further, now I got stuck at ACPI:
I also read the "Intel HD Graphics 5500 - Need some help" but I really don't understand much whats written there

Post CLOVER/EFI folder.

You have picked a difficult laptop to start with. Not much is known about Broadwell OS X yet, so it is likely to be a rocky road and you'll need to learn much.

 

[frizinko]

I was finally able to boot and install. I followed your guide, used intel 5000 config.plist and kexts from downloads section. I also setup PCIRootUID=0 npci=0x2000

of course graphics card is not working and I guess there's something worng with cpu, cause time is too quick - 1 osx minute is about 2-3 seconds it's nearly impossible to enter any text on keyboard

 

[RehabMan]

I was finally able to boot and install. I followed your guide, used intel 5000 config.plist and kexts from downloads section. I also setup PCIRootUID=0 npci=0x2000

of course graphics card is not working and I guess there's something worng with cpu, cause time is too quick - 1 osx minute is about 2-3 seconds it's nearly impossible to enter any text on keyboard

See here for early work on Broadwell graphics: http://www.tonymacx86.com/yosemite-laptop-support/161591-intel-hd-graphics-5500-need-some-help.html

And using a FakeCPUID will probably help with the CPU problem: http://clover-wiki.zetam.org/Configuration/KernelAndKextPatches#FakeCPUID

 

[frizinko]

See here for early work on Broadwell graphics: http://www.tonymacx86.com/yosemite-laptop-support/161591-intel-hd-graphics-5500-need-some-help.html

And using a FakeCPUID will probably help with the CPU problem: http://clover-wiki.zetam.org/Configuration/KernelAndKextPatches#FakeCPUID

i tried almost all fakecpuid values from http://clover-wiki.zetam.org/Configuration/KernelAndKextPatches#FakeCPUID but it doesn't help, osx always shows processor "2.39ghz dual-core intel xeon"

i can also see message during boot - "this is an unknown cpu model 0x46"

 

[RehabMan]

i tried almost all fakecpuid values from http://clover-wiki.zetam.org/Configuration/KernelAndKextPatches#FakeCPUID but it doesn't help, osx always shows processor "2.39ghz dual-core intel xeon"

i can also see message during boot - "this is an unknown cpu model 0x46"

If you're able to boot, I would not worry about cosmetics...

 

[frizinko]

If you're able to boot, I would not worry about cosmetics...

I'm able to boot but os is unusable, because clock is 20-30x faster - it's impossible to use keyboard, each keypress produces tens of characters