- Joined
- Feb 19, 2012
- Messages
- 16
- Motherboard
- GA-B250M-GAMING 3
- CPU
- i5-7500
- Graphics
- HD 630
- Mac
- Classic Mac
- Mobile Phone
This is my build to use as a Logic X and Pro Tools DAW. I will post hardware specs with links if someone will verify that I am allowed to link Microcenter as this was the place that I bought the parts.
Created USB Image using Unibeast 2.1.0 and Retail Apple Mountain Lion 10.8.5 release.
Hardware Used:
GigabyteGA-B85M-D3H LGA 1150 mATX Intel Motherboard
IntelCore i7 4770K 3.5GHz Socket LGA 1150
CrucialBallistix Sport 16GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Two 8GB Memory Modules)
SanDisk Extreme SDSSDX-120G-G25 120GB SATA 6.0Gb/s 2.5" Internal Solid State Drive
Toshiba3TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive PH3300U-1I72
ThermaltakeTR2 Series 600 Watt ATX Power Supply
TP-LINK TL-WN851ND Wireless N PCI AdapterTP-Link(http://www.osx86.net/files/file/65-tl-wn851nd-ar9227/)
Procedure:
1. BIOS: Load default optimized settings.
2. BIOS: Set XHCI mode to disabled (USB 2.0 only)
3. Make sure you remove GenericUSBHCXI.kext from extra/extensions folder of the USB drive.
4. Install Mountain Lion 10.8.5 and restart.( I powered off my computer and installed my GTX 650ti at this point)
5. Boot into the new Mountain Lion drive using the USB. You should not have issues booting up but if you run into issues you can try safe mode -x or GraphicsEnabler=No as boot flags.
6. Once rebooted I launched Multibeast 5.5.1 and installed the following:
Trim Enabler- 10.8.3+ TRIM Patch
FakeSMC
FakeSMCPlugins- Plugins, HWMonitor Application
Lnx2Mac's Realtek Ethernet Driver
Chimera 2.2.0 -if you are using HD4600 then install Chimera 2.2.0 and from Multibeast 5.5.1 install the Mac Mini Profile to enable Graphics memory greater than 64M.(I am using my GPU-650ti but did verify that Integrated Graphics was fully functional after multibeast)
7. Reboot into BIOS
8. Enable XHCI mode to enable USB 3.0(this is ok to do only when the install has been completed and Multibeast has been ran)
9.Reboot
DONE!!!! You should have a fully bootable OSX Build. As far as Sound I have not initialized this as I am using a Tascam US-1800 usb interface. I have full sleep and wake.
I am going to install windows on another hard drive for dual booting. I will update the thread with my results. I am also going to try this same set up with the i5 4670k as well.
Created USB Image using Unibeast 2.1.0 and Retail Apple Mountain Lion 10.8.5 release.
Hardware Used:
GigabyteGA-B85M-D3H LGA 1150 mATX Intel Motherboard
IntelCore i7 4770K 3.5GHz Socket LGA 1150
CrucialBallistix Sport 16GB DDR3-1600 (PC3-12800) CL9 Dual Channel Desktop Memory Kit (Two 8GB Memory Modules)
SanDisk Extreme SDSSDX-120G-G25 120GB SATA 6.0Gb/s 2.5" Internal Solid State Drive
Toshiba3TB 7,200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive PH3300U-1I72
ThermaltakeTR2 Series 600 Watt ATX Power Supply
TP-LINK TL-WN851ND Wireless N PCI AdapterTP-Link(http://www.osx86.net/files/file/65-tl-wn851nd-ar9227/)
Procedure:
1. BIOS: Load default optimized settings.
2. BIOS: Set XHCI mode to disabled (USB 2.0 only)
3. Make sure you remove GenericUSBHCXI.kext from extra/extensions folder of the USB drive.
4. Install Mountain Lion 10.8.5 and restart.( I powered off my computer and installed my GTX 650ti at this point)
5. Boot into the new Mountain Lion drive using the USB. You should not have issues booting up but if you run into issues you can try safe mode -x or GraphicsEnabler=No as boot flags.
6. Once rebooted I launched Multibeast 5.5.1 and installed the following:
Trim Enabler- 10.8.3+ TRIM Patch
FakeSMC
FakeSMCPlugins- Plugins, HWMonitor Application
Lnx2Mac's Realtek Ethernet Driver
Chimera 2.2.0 -if you are using HD4600 then install Chimera 2.2.0 and from Multibeast 5.5.1 install the Mac Mini Profile to enable Graphics memory greater than 64M.(I am using my GPU-650ti but did verify that Integrated Graphics was fully functional after multibeast)
7. Reboot into BIOS
8. Enable XHCI mode to enable USB 3.0(this is ok to do only when the install has been completed and Multibeast has been ran)
9.Reboot
DONE!!!! You should have a fully bootable OSX Build. As far as Sound I have not initialized this as I am using a Tascam US-1800 usb interface. I have full sleep and wake.
I am going to install windows on another hard drive for dual booting. I will update the thread with my results. I am also going to try this same set up with the i5 4670k as well.