[ success ] i7-2600k 3.40ghz, GA Z68XP-UD4, GA HD 6870

[fol1977]

System: GA Z68XP-UD4 Socket 1155
CPU: Intel Core i7-2600K 3.40GHz Socket 1155
Graphics: VGA Gigabyte Radeon HD 6870 OC Core 915MHz

I followed the guide for SNOW LEOPARD

http://tonymacx86.blogspot.com/2010/04/ ... -x-on.html

STEP 3: UPDATE TO 10.6.8

1. Open system using iBoot (type PciRootUID=1 at the Bootscreen)
2. Run UpdateHelper
3. Reboot with iBoot(type PciRootUID=1 at the Bootscreen)
4. Run 10.6.8 Combo Update
5. Reboot with iBoot (type PciRootUID=1 at the Bootscreen)
6. Configure System using Multibeast 3.10.0

 

[black_tip_shark]

Hi, I'm using the same board. How do I tell whether my board is F2, F3, F4, F5?
I don't seem to find such related info on any of the label of the box?.

Thanks much in advance!

 

[shibirian]

Hi, I'm using the same board. How do I tell whether my board is F2, F3, F4, F5?
I don't seem to find such related info on any of the label of the box?.

Thanks much in advance!

At boot, upper left corner, following your motherboard model number, as in this screenshot:

 

[fol1977]

System: GA Z68XP-UD4 Socket 1155
CPU: Intel Core i7-2600K 3.40GHz Socket 1155
Graphics: VGA Gigabyte Radeon HD 6870 OC Core 915MHz

I am using my hackintosh for editing video, I found some problems: sometimes using FCP o Adobe -- i am not sure about that - the machine freezes and need to be restarted. And my usb 3.o ports (two in my hackintosh) don't work properly.

I have cloned my system with ccc and try a new multibeast (there'a new video guide)

I'll write more later I hope...

 

[fol1977]

I did a new multibeast configuration, it's working fine by now but USB3 still missing... i tried to delete manually the kext and reinstall that but nothing happened.

I have to say in the previous config. i forgot to rename the "GA Z68XP-UD4.aml" to "DSDT.aml" - this time i did that and put the file DSDT.aml on my desktop

I followed the guide http://tonymacx86.blogspot.com/2012/02/ ... video.html but really it was not really helpfull because it says to install things you have not to install (in my opinion of course)

by the way these are my new conf.:

 

[tayz0n]

I have some problems with my config
i7 2600k
GA-Z68XP-UD4 (rev 1.3) BIOS ver - F5
Radeon 6850 1gb

i made USB with Unibeast (10.7.3 from app store)
i take DSDT from tonymacx86 base (for F5 BIOS ver) and run it with MultiBeast

system - ok
video - ok
sound - work but with some troubles (i have VERY silent sound on max level)
i have second external sound card (m-audio FireWire) with same problem with silent sound)
Sometime have some system crash with playnig FLASH sound from browser(safari)

anybody have any ideas ?
help

p.s.
maybe downgrade BIOS to F4 versoin ?
or made another DSDT ?

 

[shibirian]

There are various things you could try to do:

1) Clean and rebuild your hackintosh thoroughly with Onyx (see my signature for this) and see if it helps things.

2) Upgrade to bios F6 (it's okay, as long as your bios version is higher than the DSDT version (so bios F6 & dsdt F4 = ok / bios F3 & dsdt F5 = bad).

3) Build your own DSDT, it's not hard at all! (see my signature for this, too)

4) Regarding your Flash video crashes please post your ioreg | grep ATY results from typing this command in terminal

That's as much as I can think about at this moment. Best you start out with points 1+4 and let us know your results.

Good luck!

 

[tayz0n]

Thank you
i`ll try it

 

[tayz0n]

hi

i write it to terminal

Alexs-Mac-Pro:~ alex$ ioreg | grep ATY
| | | | +-o ATY,Duckweed@0 <class AtiFbStub, id 0x1000002c8, registere$
| | | | +-o ATY,Duckweed@1 <class AtiFbStub, id 0x1000002c9, registere$
| | | | +-o ATY,Duckweed@2 <class AtiFbStub, id 0x1000002ca, registere$
| | | | +-o ATY,Duckweed@3 <class AtiFbStub, id 0x1000002cb, registere$
Alexs-Mac-Pro:~ alex$