Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

What is the best OpenCore config boot-up (verbose) resolution setting for my 3440x1440 display?
My verbose boot screen is suffering from what seems to be font-flation.
I have removed “UIScale” from NVRAM —> Add (but not from NVRAM —> Delete) and set UIScale to 0 in UEFI —> Output. Now OpenCore takes care of all boot time scaling.
 
I received today my new 2TB Crucial P2 NVMe.
I want to make a fresh install of Open Core Big Sur 11.6.7 on the new drive and test it before I migrate it on my older Cover (5.17.4.3) Mojave main drive.
On the open core 0.7.8 guide it says i should update my BIOS to f9i

Will my old Clover boot still work normal after BIOS update ?
 
I received today my new 2TB Crucial P2 NVMe.
I want to make a fresh install of Open Core Big Sur 11.6.7 on the new drive and test it before I migrate it on my older Cover (5.17.4.3) Mojave main drive.
On the open core 0.7.8 guide it says i should update my BIOS to f9i

Will my old Clover boot still work normal after BIOS update ?
Sure, Clover will still work with BIOS F9i.
 
@CaseySJ Today the weirdest thing happened to my system; it turned itself into a MB Pro M1. Guess Apple pushed an update :mrgreen:

IMG_2413.JPEG
 
Hello,
I finally found where my sleep/Wake problem comes from.
The culprit is my Thunderbolt card (asus EX3)
If I disconnect the TB header cable from the Asus card, the standby mode works normally.

If this information can help...!!
 
Back
Top