- Joined
- Apr 3, 2018
- Messages
- 5
- Motherboard
- MSI Z270-A Pro
- CPU
- Core i7 7700
- Graphics
- Gigabyte RX 580 OC Gaming 8 GB
First of all, I would like to thank all of the community, developers and people who share their knowledge and experience. I had couple of experiences with Clover on High Sierra but there were some issues with my builds and I thought I should give an Open Core try.
I read the official guide start to finish:
and followed the guide here:
I built the system and boom! it was success in the first try! I couldn't believe how smooth the whole process was. My LAN, Soundcard and Video was ready to go on the first boot. The documentation is very detailed and video guide helped a lot too.
After completing the installation I found that my USB3 drives are not recognized. Somehow my USBmap.kext was wrong and I fixed it by following this guide:
After that, I plug my Windows 10 hdd and there was a blue screen (0xc000000d) indicating that I should repair my drive. Before going on with repair or anything, I quickly go back to guide and found what was wrong. Enabled SyncRuntimePermissions on config.plist and then Windows boot was smooth as well.
Finally, when I load 4K videos and encoding on iMovie, cpu fan was kicking off. I quickly figured that radeon video decoder was not on.
I applied overrides below and video decoding and encoding was ok too.
So only thing that does not work is wifi. I knew that it won't work but interestingly Mac system info shows wifi card info but it's obviously not working.
I'm attaching my EFI if anyone needed.
Cheers!
I read the official guide start to finish:
and followed the guide here:
I built the system and boom! it was success in the first try! I couldn't believe how smooth the whole process was. My LAN, Soundcard and Video was ready to go on the first boot. The documentation is very detailed and video guide helped a lot too.
After completing the installation I found that my USB3 drives are not recognized. Somehow my USBmap.kext was wrong and I fixed it by following this guide:
After that, I plug my Windows 10 hdd and there was a blue screen (0xc000000d) indicating that I should repair my drive. Before going on with repair or anything, I quickly go back to guide and found what was wrong. Enabled SyncRuntimePermissions on config.plist and then Windows boot was smooth as well.
Finally, when I load 4K videos and encoding on iMovie, cpu fan was kicking off. I quickly figured that radeon video decoder was not on.
I applied overrides below and video decoding and encoding was ok too.
WhateverGreen/Manual/FAQ.Chart.md at master · acidanthera/WhateverGreen
Various patches necessary for certain ATI/AMD/Intel/Nvidia GPUs - acidanthera/WhateverGreen
github.com
So only thing that does not work is wifi. I knew that it won't work but interestingly Mac system info shows wifi card info but it's obviously not working.
I'm attaching my EFI if anyone needed.
Cheers!