Hey Appletwo, I was wondering if you could help me with my Build. I have the same setup as you except: I have a compatible Xeon processor, RAM and SSDs. The problem is my Hardware configuration. I was able to navigate to a few menus in the BIOS screen but after about 30 seconds, my machine shuts down.
If it's not too much, can you walk me through your connections between the components? my build is a mess right now. This is how I currently set up my build:
Both SP120 fans are screwed to the radiator and the fans are hooked directly to the H100i via the Y Cable.
The H100i Cooling Unit is powered by the SATA from RM750.
The Cooling Unit's 3 pin fan connector is connected to the CPU_FAN header on Mobo.
The Cooling Unit's Mini USB goes to the USB Header on the Mobo.
I left the Corsair Link expansion port on the side of the Cooling unit empty because I didn't know what to do with it.
AF120 and Spectre Pro fans are connected directly to the nearest Mobo Fan headers.
Wifi card is connected through PCI.
SSD is powered through PSU and connected via SATA through
StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter
GPU is connected through PCI and powered from PSU.
2xScythe Kaze Master is not connected or powered on because I got lost and didn't know how to use or connect to/from fans. It came with many red/white connectors.
All of the cables that came with the case I connected them to the appropriate headers on the motherboard. EXCEPT the USB type A connector because that one just threw me off and wasn't sure where that one goes.
I may have left something out but I am not near my machine right now. Can you help to guide me in the right direction?