Stuck on PCI Configuration End

[axonz]

config & all SSDTs (DSL) attached

I have a Lenovo V14-IIL
Intel Core i5 10th gen
UHD 920

how can I fix this issue and boot into recovery?
also i am using OpenCore 0.9.3
PS. I don't haven't installed MacOS yet.

 

[Feartech]

View attachment 568483
config & all SSDTs (DSL) attached

I have a Lenovo V14-IIL
Intel Core i5 10th gen
UHD 920

how can I fix this issue and boot into recovery?
also i am using OpenCore 0.9.3
PS. I don't haven't installed MacOS yet.

you can probably remove:
PCIRootUID=1 -x
boot arguments

doesn't look like it likes your battery

try adding SMCBatteryManager.kext to see if that helps

 

[Feartech]

may also require:
-igfxcdc -igfxdvmt
boot arguments
and:
npci=0x3000 may not be needed

 

[axonz]

just tested smcbatterymanager
welp, it didnt change anything
give me asec to change the bootargs

 

[axonz]

npci=0x3000 may not be needed

i need npci I believe because I dont have access to a bios option (i forgot which one)

 

[Feartech]

just tested smcbatterymanager
welp, it didnt change anything
give me asec to change the bootargs

you also need to reset nvram on each try

 

[axonz]

still same issue
[ PCI configuration end, bridges 3, devices 15 ]
idk if this helps but my laptop doesnt support external SSD/HDD (it doesnt have the JHDD1 controller)

 

[axonz]

you also need to reset nvram on each try

oh ok 1s

still same issue

 

[Feartech]

still same issue
[ PCI configuration end, bridges 3, devices 15 ]
idk if this helps but my laptop doesnt support external SSD/HDD (it doesnt have the JHDD1 controller)

shouldn't be an issue

what is the make and model of your nvme/ssd?

 

[axonz]

what is the make and model of your nvme/ssd?

SKHynix_HFM256GDHTNI-87A0B NVME
By "Hynix Semiconductor"
honestly i have no idea who is hynix semiconductor, the nvme is the one that it came with