Searching for DSDT and HowTo for GA-Z77-DS3H

[themaster82]

Please can anybody Help me out?

Thx

PS: Using ML 10.8
i5 3570k
8GB HyperX 1600
6870 XFX

 

[mustang80]

Pretty much the set up i'll be using.

You don't need a DSDT with that board as it has an EUFI - Install with on-board video first, then install video card once you're up and running.

Should be a pretty pain free combo - unless you have revision 1.1 board = then you may have ethernet problems.

Just follow tonymacs guide to installing 10.8.2 and you'll be good to go (unless someone can correct me?) New to all this myself, but that's what I think so far.

Good luck!

 

[MarcelBidon]

You don't need a DSDT. The CPU power management is compatible out of box. This Mobo is booting with only FakeSMC.kext and full Apple kext. For how to, you can use any from forum for DS3H or DS5H (except you have ALC887 for Audio)

 

[themaster82]

Thx Guys, i'll try it. I think i had started with the onboard but im not sure. We'll see

Edit:
Still the same Problem. Installed with onboard. No Onboard HDMI Sound Output. 6870 out of Work...

Any Ideas please?

 

[themaster82]

Edit:
Still the same Problem. Installed with onboard. No Onboard HDMI Sound Output. 6870 out of Work...

Any Ideas please?

Edit2:

Tried everything. 3 times new installed...nothing. no sound. any ideas? please please please. Just using onboard gpu hd4000

For how to, you can use any from forum for DS3H or DS5H (except you have ALC887 for Audio) - Got ALC 887. Using the settings like discribed in the howto...since first time.