- Joined
- Jul 22, 2011
- Messages
- 89
- Motherboard
- Mav 10.9.2 GA Z68-UD5-B3
- CPU
- Intel i7 2600k
- Graphics
- xfx radeon 6870
- Mac
- Classic Mac
- Mobile Phone
Hi,
Did a clean install with unibeast,Mavericks 10.9.2 and MultiBeast 6.2
Used the Patched CPUPowerManagement optioin along with basics like ALC889 with the F10 DSDT from tonymac. Had internet, sleep, just about everything working except sound when I worked around an earlier KP by dropping in another CPUPower kext I found online but on restart I was back to getting the power management errors. Since gone back to original MB6 version.
Do I need an SSDT for the 2600k. Are there pre-made versions like DSDT or working guide versions for 2600k on similar board?
Should I be using the Null Power Management setting with or instead of the patched CPUPower kext
Latest KP showing other IOPlatform issues as well.
thanks in advance for any help
Did a clean install with unibeast,Mavericks 10.9.2 and MultiBeast 6.2
Used the Patched CPUPowerManagement optioin along with basics like ALC889 with the F10 DSDT from tonymac. Had internet, sleep, just about everything working except sound when I worked around an earlier KP by dropping in another CPUPower kext I found online but on restart I was back to getting the power management errors. Since gone back to original MB6 version.
Do I need an SSDT for the 2600k. Are there pre-made versions like DSDT or working guide versions for 2600k on similar board?
Should I be using the Null Power Management setting with or instead of the patched CPUPower kext
Latest KP showing other IOPlatform issues as well.
thanks in advance for any help