- Joined
- Apr 29, 2015
- Messages
- 3
- Motherboard
- GA-Z97X-Gaming 3 BIOS F5 Unibeast
- CPU
- i5-4590
- Graphics
- GTX 750
- Mac
- Classic Mac
- Mobile Phone
Project: Motomize. Install successful-but Cannot boot Yosemite w/o Unibeast +flags
i5-4590
GA-Z97X-GAMING 3
8GB RAM
GTX 750
Seagate 1T HDD
Ethernet is connnected
OS X 10.10.3
Followed instructions to create Unibeast install on USB 3.0 drive: SUCCESS
Change BIOS:
Optimized Defaults
VT-d OFF
Intel Virtualization OFF
OS Type OTHER OS
System boots to Unibeast
boot argue
-x -v nv_disable=1
Progesses to Mac OS X Installer
Partition HDD
Installer completes
Reboot
Load new Yosemite installation
Load Multibeast. Config Complete
***Update: After Multibeast was conferred and loaded like this:
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > Optional HDAEnabler > Audio ID: 1
Drivers > Disk > 3rd Party SATA
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Disk > TRIM Enabler > 10.10.x TRIM Patch
Drivers > Misc > FakeSMC v6.14.1364
Drivers > Misc > FakeSMC v6.14.1364 Plugins
Drivers > Misc > FakeSMC v6.14.1364 HWMonitor Application
Drivers > Misc > NullCPUPowerManagement
Drivers > Network > Intel > Atheros E2200
Bootloaders > Chimera v4.0.1
Customize > Boot Options > 1080p Display Mode
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Kext Dev Mode
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Blac
Upon reboot, Yosemite install is still hanging. Going to try a few more bootleg arguments
i5-4590
GA-Z97X-GAMING 3
8GB RAM
GTX 750
Seagate 1T HDD
Ethernet is connnected
OS X 10.10.3
Followed instructions to create Unibeast install on USB 3.0 drive: SUCCESS
Change BIOS:
Optimized Defaults
VT-d OFF
Intel Virtualization OFF
OS Type OTHER OS
System boots to Unibeast
boot argue
-x -v nv_disable=1
Progesses to Mac OS X Installer
Partition HDD
Installer completes
Reboot
Load new Yosemite installation
Load Multibeast. Config Complete
***Update: After Multibeast was conferred and loaded like this:
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC1150
Drivers > Audio > Realtek ALCxxx > Optional HDAEnabler > Audio ID: 1
Drivers > Disk > 3rd Party SATA
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Disk > TRIM Enabler > 10.10.x TRIM Patch
Drivers > Misc > FakeSMC v6.14.1364
Drivers > Misc > FakeSMC v6.14.1364 Plugins
Drivers > Misc > FakeSMC v6.14.1364 HWMonitor Application
Drivers > Misc > NullCPUPowerManagement
Drivers > Network > Intel > Atheros E2200
Bootloaders > Chimera v4.0.1
Customize > Boot Options > 1080p Display Mode
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Kext Dev Mode
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Blac
Upon reboot, Yosemite install is still hanging. Going to try a few more bootleg arguments