- Joined
- Jan 18, 2014
- Messages
- 2
- Motherboard
- Dell Inspiron 5520
- CPU
- 3rd Gen Intel Core i7-3632QM
- Graphics
- Intel HD Graphics 4000
- Mac
- Classic Mac
- Mobile Phone
My laptop specs:
Inspiron 15R Notebook (Inspiron 5520)
3rd Gen Intel Core i7-3632QM
8GB,DDR3
Dell Chiclet Keyboard with Multi-touch Touchpad
15.6 High Definition (720p) LED Display with Truelife
Intel HD Graphics/HD Graphics 4000
SRV Software for 2230 WIFI Wireless Card
1TB 5400 RPM SATA Hard Drive
Integrated Network Card
8X Tray Load CD/DVD Burner (Dual Layer DVD+/-R Drive)
Intel Centrino Wireless 2230, 2x2 bgn + Bluetooth
Hi, I am trying to install OSX Yosemite on my laptop (specs above) and when I boot from USB and choose the Unibeast USB, and hit enter, it keeps loading with Apple logo and suddenly freezes. So I used the boot flags -v to see what was happening. It was freezing at 'ApplePS2Controller: setCommandByte for mouse interrupt install (followed by oldCommandByte/newCommandByte).
So I did some research and figured out I should get the latest RehabMan VoodooPS2Controller.kext from his git. I downloaded using bitbucket and replaced the VoodooPS2Controller.kext file in Extras/Extensions with the downloaded one. I also removed '/Extra/Extensions/AppleACPIPlatform.kext' and added 'GenericUSBXHCI.kext' downloaded from his git (which was optional).
So after I did this, am stuck with
'VoodooPS2Trackpad: Identify TouchPad command returned incorrect byte 2 (of 3)'
I did try booting with flags -x -v dart=0.
Any help would be appreciated.
Inspiron 15R Notebook (Inspiron 5520)
3rd Gen Intel Core i7-3632QM
8GB,DDR3
Dell Chiclet Keyboard with Multi-touch Touchpad
15.6 High Definition (720p) LED Display with Truelife
Intel HD Graphics/HD Graphics 4000
SRV Software for 2230 WIFI Wireless Card
1TB 5400 RPM SATA Hard Drive
Integrated Network Card
8X Tray Load CD/DVD Burner (Dual Layer DVD+/-R Drive)
Intel Centrino Wireless 2230, 2x2 bgn + Bluetooth
Hi, I am trying to install OSX Yosemite on my laptop (specs above) and when I boot from USB and choose the Unibeast USB, and hit enter, it keeps loading with Apple logo and suddenly freezes. So I used the boot flags -v to see what was happening. It was freezing at 'ApplePS2Controller: setCommandByte for mouse interrupt install (followed by oldCommandByte/newCommandByte).
So I did some research and figured out I should get the latest RehabMan VoodooPS2Controller.kext from his git. I downloaded using bitbucket and replaced the VoodooPS2Controller.kext file in Extras/Extensions with the downloaded one. I also removed '/Extra/Extensions/AppleACPIPlatform.kext' and added 'GenericUSBXHCI.kext' downloaded from his git (which was optional).
So after I did this, am stuck with
'VoodooPS2Trackpad: Identify TouchPad command returned incorrect byte 2 (of 3)'
I did try booting with flags -x -v dart=0.
Any help would be appreciated.