No Monitor Signal - Everything working yesterday

[estevens]

No Monitor Signal - Everything working yesterday - SOLVED

Hello,

I recently updated my hackintosh to Yosemite and everything has been working relatively well, except for a few minor things. I go to turn it on today, and now my monitor's getting no signal. I've tried two separate monitors, different connections (displayport/DVI/RGB), with no luck. I'm using the onboard grahics card with the GA-Z7X-UD5H motherboard. Any suggestions would be greatful!

Thanks,
Erin

 

[Pie]

Can you get to the BIOS or are you not getting signal period? That happened to me a couple months ago and I had to manually reset the CMOS by touching a screwdriver to the reset prongs on my motherboard...

If you can get to the BIOS, try booting with your UniBeast stick to see if graphics work using the default configuration.

 

[estevens]

Hi Pie,

I'm not getting a signal at all. Apparently my motherboard has a Clear CMOS button... Would that be the same as the screwdriver thing?

Thanks for your help!
Erin

 

[Pie]

Go ahead and try that; it will reset ALL of your BIOS settings so make sure you go back and make appropriate changes. Good luck.

 

[estevens]

That did the trick... Thanks!