No boot after installation Z87 HD3

[florent522]

I have boot installation with flasg GraphicsEnabler=No PCIRootUID=1 dart=0 but after impossible to boot with any flags

My setup is GA Z87 HD3 and i5 4670

for bios:

VT-d - disabled
XHCI Mode - Smart Auto
XHCI Hand-off - enabled
EHCI Hand-off - enabled
and IGC for first graphics

Anybody can help?

 

[scatman]

Try adding the IGPEnabler parameter to your org.chameleon.Boot.plist.

<key>IGPEnabler</key>
<string>Yes</string>

For further information you can visit the following URL:
http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

Good luck.
Scatman

 

[tobitobst]

Intel HD4600 Graphics need GraphicsEnabler=Yes to boot

also GraphicsEnabler=No is the default setting now (see Unibeast 3 release info)

 

[florent522]

thanks for your help, i have boot to success with flags GraphicsEnabmer=yes PCIRootUID=1 -x

After multibeast installation i have kernel panic withtout option -x



Wrong mutlibeast setup?

 

[Mark1102]

Selecting MacPro 5,1 will cause a kp unless you delete AppleTyMCEDriver.kext from S/L/E

 

[florent522]

thx, i have try but it's nt influence

Also in my informations systems os x dislay only IGPU and not HD4600 (i view this on other success build?) and hdmi and dvi work but only for replicate (not extended) and the sound not working too

So finally i can onyl boot with the option -x, i don't know if my install sucks or wrong bios config?

Thanks for your help, i have waiting for other users with same MB success

 

[ss_arbalest]

Hi!, I've successful installed mavericks on my GA-Z87-HD3 with hdmi 1080p with this guide:

http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

Now I've two problems:

1. I can't boot mavericks without usbdrive after used multi beast, I've GPT boot0 error
2. with HDMI cable I can't ear any sound but graphic io ok!

So, how I can do to solve my problems??? Any Ideas?

Thanks a lot!!!

 

[brotwerk]

http://youtu.be/eS4rJCIFc_k?t=22m58s

I hope it helps with the booy0 boot problem

cheers