No Audio Devices - Realtek ALC AppleHDA [Guide]

[YachtRock5000]

See Post #1, If System Preferences/Sound/Output shows audio output devices...

hmmm, switched over to Win10 (on separate SSD) in the interim - upon reboot back to OSX, we are back to no audio devices listed (and I'm back to this thread). Here's an updated problem description:

Problem Reporting

1. No audio devices listed in SysPrefs/Sound
2. OS X 10.11.5 / GA-Z170N-Gaming5 / BIOS version F3 / i7-6700k / nVidia GTX 970 SSC
3. Procedure/Guide Used
   1. MultiBeast / ALC1150
4. Audio/ALC Injection (attached)
5. Copy of IOReg (attached)
6. System/Library/Extensions/AppleHDA.kext (attached)
7. n/a
8. Console/All Messages/kernel Sound Assertions (attached)
9. Screen shots:
   1. DPCIManager/Status (attached)
   2. System Information/Hardware/Audio/Intel High Definition Audio (attached)
10. Terminal/Shell/Export Test As. . . (attached)
    1. audio_cloverALC-110...command
11. Chameleon (n/a)
12. Clover
    1. EFI/CLOVER/config.plist (attached)
    2. DPCIManager/Misc/Boot Log (attached)
    3. n/a
    4. n/a

 

[cambo123]

Here is mine
1. No output/input devices found in system preferences, audio devices present in system preferences
2. OS X Version: 10.11.5, Motherboard: Z170MX-Gaming 5, Bios Version: F4, Processor: i5 6600k, Graphics: GTX 950
3. MultiBeast audio selection (successful on first install...unsuccessful since), ran installer and tried again with realtekALC.
4. Attached, "Terminal_Save_Output_4
5. Attached, "IOreg"
6. Attached
7. Not seeing this
8. Attached, "All Messages.log"
9.Two files attached, "DPCIManager_Status","SysInfo_Hardware_Audio"
10. Attached, I ran this previously after installing over my current OS X to restore the AppleHDA
11. Attached

 

[Sylvan]

I have no audio device and would like some help. Let me see if I can gather the required information.
OS X version 10.11.5 (15F34) / ASUS Maximus VIII Gene Z170 / BIOS version: unknown but it was the latest update / i7-6700k / Nvidia GTX 980 Ti
I tried the Realtek ALC AppleHDA guide that you posted and so far haven't had any success. I installed the Realtek ALC driver with Multibeast (clover).

 

[toleda]

switched over to Win10

2nd request, see Post #1825, click the link.
See Dual booting OS X/Windows

 

[toleda]

No output/input devices

Installed realtekALC on top of MultiBeast/Realtek ALCxxx, always fails (install one method, remove one, install two)
See Post #1/Uninstall Realtek ALC AppleHDA

 

[toleda]

no audio device

See Post #1/I. No Audio Output/Audio Input Devices Found/1. OS X Version/1. 10.11 and newer/2. Clover/config.plist/ACPI/DSDT/Fixes/NO (all or remove)
Restart. If no audio, attach all new files.

 

[cambo123]

Here is mine
1. No output/input devices found in system preferences, audio devices present in system preferences
2. OS X Version: 10.11.5, Motherboard: Z170MX-Gaming 5, Bios Version: F4, Processor: i5 6600k, Graphics: GTX 950
3. MultiBeast audio selection (successful on first install...unsuccessful since), ran installer and tried again with realtekALC.
4. Attached, "Terminal_Save_Output_4
5. Attached, "IOreg"
6. Attached
7. Not seeing this
8. Attached, "All Messages.log"
9.Two files attached, "DPCIManager_Status","SysInfo_Hardware_Audio"
10. Attached, I ran this previously after installing over my current OS X to restore the AppleHDA
11. Attached

Installed realtekALC on top of MultiBeast/Realtek ALCxxx, always fails (install one method, remove one, install two)
See Post #1/Uninstall Realtek ALC AppleHDA

Rather then try to uninstall audio drivers, I did a fresh install of OS X and ran MultiBeast with Realtek ALCxxx > ALC1150 and 100 series audio...see attached.

Additionally, I regenerated and included all files.

 

[toleda]

did a fresh install

Verify SIP is disabled, Terminal:

csrutil status

Rebuild kernel cache, Terminal:

sudo touch /System/Library/Extensions && sudo kextcache -u /

Restart, reply with new files.

 

[Sylvan]

See Post #1/I. No Audio Output/Audio Input Devices Found/1. OS X Version/1. 10.11 and newer/2. Clover/config.plist/ACPI/DSDT/Fixes/NO (all or remove)
Restart. If no audio, attach all new files.

Ok I made the change to Clover config.plist. Still no audio. Here are the new files.

 

[cambo123]

Verify SIP is disabled, Terminal:

csrutil status

Rebuild kernel cache, Terminal:

sudo touch /System/Library/Extensions && sudo kextcache -u /

Restart, reply with new files.

SIP was enabled, disabled -> rebuilt cache. Working now! Now audio doesn't work after sleep, moving onto the other thread for support on that. Thanks toleda