- Joined
- Aug 16, 2014
- Messages
- 16
- Mac
- Classic Mac
- Mobile Phone
Hi there,
after a while I'll be able to get my os x custom build almost running smoothly.
I spent the whole day with research all over the www and some trial and error tweaks but nothing works so far.
After starting my computer os x seems to load the os but also stuck in the same screen (Apple symbol with turning dots), and it never stops... :/
A boot with -v shows me something like "Missing Bluetooth Controller Support" and the only way to get into osx is via safe mode (-x).
I already know that this a pretty famous problem and means that osx isn't really recognizing the built in graphics. Here is my system and some additional information:
intel hd 4590
ga h87m-hd3 (i upaded from f6 to f8 before, because it seems more recommended than f9 or am I wrong?)
1x8GB of Crucial Ram (if it is important i can post the full name...)
physical drive1: SSD with Win 8.1 already running
physical drive2: SSD with OSX
physical drive3: HDD with 2 Partitions as storage
Screen is connected by HDMI.
I've created my unibeast with Mavericks 10.9.4 on it from an exisiting MBP using the latest unibeast version from the tonymacx site. Multibeast was used as post-installation tool (&Chimera Bootloader) with dsdtfree install.
After some time I've decided to bring up the Chameleon Wizard/Tweaker and maybe messed up the chameleon.boot.plist a little bit?! Anyway, it ends up in the same result as I descriped, OSX doesnt start...
I also disabled for example xhci and so on in the bios (everything I should disable to get it right) but nothing works
Maybe you guys have a link for a guide that matches this specific problem step by step?!
I read before that I maybe have to change something in my SMC Kext or so, that is one of things i don't really able to get?!
If it helps i can show you the boot.plist
Thanks in advance
Marcel
after a while I'll be able to get my os x custom build almost running smoothly.
I spent the whole day with research all over the www and some trial and error tweaks but nothing works so far.
After starting my computer os x seems to load the os but also stuck in the same screen (Apple symbol with turning dots), and it never stops... :/
A boot with -v shows me something like "Missing Bluetooth Controller Support" and the only way to get into osx is via safe mode (-x).
I already know that this a pretty famous problem and means that osx isn't really recognizing the built in graphics. Here is my system and some additional information:
intel hd 4590
ga h87m-hd3 (i upaded from f6 to f8 before, because it seems more recommended than f9 or am I wrong?)
1x8GB of Crucial Ram (if it is important i can post the full name...)
physical drive1: SSD with Win 8.1 already running
physical drive2: SSD with OSX
physical drive3: HDD with 2 Partitions as storage
Screen is connected by HDMI.
I've created my unibeast with Mavericks 10.9.4 on it from an exisiting MBP using the latest unibeast version from the tonymacx site. Multibeast was used as post-installation tool (&Chimera Bootloader) with dsdtfree install.
After some time I've decided to bring up the Chameleon Wizard/Tweaker and maybe messed up the chameleon.boot.plist a little bit?! Anyway, it ends up in the same result as I descriped, OSX doesnt start...
I also disabled for example xhci and so on in the bios (everything I should disable to get it right) but nothing works
Maybe you guys have a link for a guide that matches this specific problem step by step?!
I read before that I maybe have to change something in my SMC Kext or so, that is one of things i don't really able to get?!
If it helps i can show you the boot.plist
Thanks in advance
Marcel