My internal disks are not visible in the Ventura installer!

[godnesty]

My PC:
MotherBoard: MSI PRO Z690-A WIFI DDR4
CPU: Intel Core i5-12600K
GPU(NOT USING)

SSD M_2: ssd m2 samsung 980 250gb (Want to install here)
(ALL Drivers Updated

BIOS: MSI CLICK BIOS 5
I saw solves of this problem. But AHCI mode On, External Data(No option in my bios, like in ASUS Bios),

All usb mapped, but it doesnt work. My internal disks are not visible in the Ventura installer!

Check my config.plist please.

 

[Feartech]

My PC:
MotherBoard: MSI PRO Z690-A WIFI DDR4
CPU: Intel Core i5-12600K
GPU(NOT USING)

SSD M_2: ssd m2 samsung 980 250gb (Want to install here)
(ALL Drivers Updated

BIOS: MSI CLICK BIOS 5
I saw solves of this problem. But AHCI mode On, External Data(No option in my bios, like in ASUS Bios),

All usb mapped, but it doesnt work. My internal disks are not visible in the Ventura installer!

Check my config.plist please.

USBInjectAll.kext should be disabled

MinDate and MinVersion should be set to 0

try using HfsPlus.efi instead of OpenHfsPlus.efi

test without NvmExpressDxe.efi

please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

 

[godnesty]

USBInjectAll.kext should be disabled

MinDate and MinVersion should be set to 0

try using HfsPlus.efi instead of OpenHfsPlus.efi

test without NvmExpressDxe.efi

please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

No, it doesn't work(

 

[Feartech]

No, it doesn't work(

RTX 3080
is not supported

 

[godnesty]

RTX 3080
is not supported

I offed it

 

[Feartech]

I offed it

As per rules, please update your hardware profile to allow others to help you easier

https://www.tonymacx86.com/account/account-details

check bios settings:

Disable:
Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
CSM
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can't find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)

Enable:
VT-x
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB or 128MB
SATA Mode: AHCI

 

[Sudds]

Scan Policy set to 0?

 

[zirkaiva]

I had similar issue. Since I never used an installer, but installed straight from BS or Monterey after installation and booting it would not show any of my internal drives besides the one it was installed on. I was able to fix the problem with a codeless kext.