Mountain Lion: MultiBeast - No Audio/Solutions and Problem Reporting

[film_guy01]

I get no audio after updating to 10.8.4
I read through the troubleshooting guide but didn't find anything that helped me.
I have deleted and reinstalled both the appleHDA.kext and HDAEnabler1.kext and reinstalled using Multibeast 5.5 using both ALC898 and ALC892. No luck. I've had a devil of a time getting my hackintosh up and running after updating it to 10.8.4 and this is the final fix before it is back to normal. I feel like it shouldn't be that difficult.

Thanks so much!

For reference:
I have a Gigabyte GA-Z77X-UD5H Motherboard
I have an Nvidia 660Ti Graphics card
I have an Intel i5 3570K

*edit - I'll also point out I HAD audio working on 10.8.2 and haven't changed any hardware or bios settings since then. My speakers are in the green audio jack. When I go into system preferences there are no speakers or options listed under sound "Output". I've also tried to work through the troubleshooting guide only to find it was mostly incomprehensible. Like a maze with no exit. I think I have a very common mobo though so hopefully someone can offer me some useful hints or tips.

 

[EpopLesDeef]

I don't know what I did wrong but neither @HD1B nor @HD3 has Pinconfiguration.

1a. Gigabyte GA-Z87N-WIFI/Intel "Haswell" i5-4570/OS X 10.8.5/ Intel HD 4600
1b. Unibeast 2.1/ MultiBeast 5.5.0/Boot Troublshooting
here is a copy of my Extra/org.chameleon.Boot.plist:
View attachment org.chameleon.Boot.plist
1c. Without DSDT
1d.View attachment Meatballs’s Mac Pro.ioreg
1e.View attachment kernel Sound Assertions 21-09-13.log
1f.
1g.

 

[toleda]

I get no audio after updating to 10.8.4

Why do you think the 892 solution will work on your 898 system?
How did you miss Part IV. Problem Reporting, Post #1?

 

[toleda]

I don't know what I did wrong but neither @HD1B nor @HD3 has Pinconfiguration.

AppleHDA.kext did not load. Are you using an installer or safe mode to boot?
HD@3 is not working in OS X.

 

[EpopLesDeef]

AppleHDA.kext did not load. Are you using an installer or safe mode to boot?
HD@3 is not working in OS X.

I used to have to boot -x every time until I modified my Extra/org.chameleon.Boot.plist.
I boot straight from Chimera 2.2.0 always.
I had to install with safe mode.

 

[toleda]

I boot straight from Chimera 2.2.0 always.

IOReg says nothing is working; audio, lan, graphics, etc.
Is HD audio enabled in the BIOS. What version of AppleHDA.kext is installed?

 

[EpopLesDeef]

IOReg says nothing is working; audio, lan, graphics, etc.
Is HD audio enabled in the BIOS. What version of AppleHDA.kext is installed?

2.4.7
Could my generate states and kernel cache boot options keep me in safe mode state with no drivers?

Edit Yes to the BIOS question, works fine with Windows 7

Update Boot froze up with UseKernelCache=No

 

[film_guy01]

Why do you think the 892 solution will work on your 898 system?

I tried the 892 because 898 solution didn't work on my 898 system.

How did you miss Part IV. Problem Reporting, Post #1?

I posted the answer to 1, 2, 3 (my kext version is 2.4.7 I assumed that since I installed it from Multibeast 5.5 as I mentioned I would have the same kext as everyone else who installed from Multibeast 5.5), 4, as for 6 I don't see any sound assertions anywhere in my console. Find 5, 7 and 8 attached.
ATTACH]67953[/ATTACH]

 

[ccsnet]

1. Description of audio problem, include the following information
No sound available including no controls to select in System Prefs/Sound . Run through solution guide and found No Pins data shown on the final step

2. Motherboard/processor/OS and version/graphics
Dell 560 - AMD 5450 Video card running OSx 10.8.4

3. Procedure/Guide Used/AppleHDA.kext version
Install OSx
Install screen drivers with Kextbeast
Run multibeast 5.4.3 - installed Realtec Network card - rebooted
Run multibeast 5.4.3 - Select Kernal Cached & installed Chimera - rebooted
Run multibeast 5.4.3 - With out DSDT - legacy sound drivers ( note Voodo has worked in the past )

4. Extra/dsdt.aml (if installed)
N/a

5. copy of IOReg [Guide] How to Make a Copy of IOReg
6. Console/All Messages/kernel Sound Assertions selected/Save Selection As…..
7. Screenshot of System Information/Hardware/Audio/Intel High Definition Audio (not Devices)
8. Screenshot of System Information/Hardware/Graphics/Displays
All attached in the zip file

Thank you for your help in advance.

Terran

Edit.. I'm not sure if this is any help but I have found that if I boot by Grub then my SN goes to the Dell number and that the web cam ( plugged in to a USB hub ) starts to work with Facetime but because of the SN issue will not work as will not the market, When I boot using Chimera 2.1 the web fails to be found and the SN is back.... Sound works in neither.

 

[toleda]

I tried the 892 because 898 solution didn't work on my 898 system.

Looks like the 892 AplpleHDA.kext is installed.. Try MultiBeast 5.5 or newer - Select-Drivers & Bootloaders Drivers - Audio - Realtek ALC8xx - Without DSDT √ ALC898