- Joined
- Dec 14, 2011
- Messages
- 7
- Motherboard
- Lion
- CPU
- i3
- Graphics
- Radeon 5450
- Mac
- Classic Mac
- Mobile Phone
Mountain Lion Installation Done - Does not boot... Screenshots provided...
- Thread starter enigma2win
- Start date
- Status
- Joined
- Apr 5, 2011
- Messages
- 204
- Motherboard
- GA-Z68MA-D2H-B3
- CPU
- i7-2600k
- Graphics
- XFX ATI Radeon HD 5870
- Mac
- Classic Mac
- Mobile Phone
It'll be much easier to try to debug if you state clearly the steps you have taken so far to get it to work (e.g. what guide you are following, any early discrepancies observed, etc.).
- Joined
- Jul 31, 2012
- Messages
- 38
- Motherboard
- ASUS P9-X79 Pro
- CPU
- Intel Core i7 3930K
- Graphics
- EVGA GTX 980 Ti & ASUS GTX 670
- Mac
- Mobile Phone
I am having somewhat of the same problem. Here are my specs: Mobo- -Asus P9X79 PRO (UEFI BIOS) CPU- -Intel Core i7-3930K BX80619i73930K Unlocked Processor (LGA 2011) GPU- -ASUS GTX670-DC2-2GD5 GeForce GTX 670 2GB (PCI-e 3.0) RAM- -G.SKILL Ripjaws Z Series 32GB (4 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 (PC3 14900) I have tried using (PCIRootUID=0) and (GraphicsEnabler=No) in the Uni Beast Command line. But I can't get to the installation screen, just the grey apple logo and the white back ground. Also I tried (-v) to see if there was an error message, but I couldn't really find one. PS: Can I use 2 codes at one time in the Unibeast Command line? If so, how?
- Joined
- Jul 31, 2012
- Messages
- 38
- Motherboard
- ASUS P9-X79 Pro
- CPU
- Intel Core i7 3930K
- Graphics
- EVGA GTX 980 Ti & ASUS GTX 670
- Mac
- Mobile Phone
Ok I found a fix!!!!! for me at least.
Use this command: -v npci=x2000
That is what I used and I have it working.
Use this command: -v npci=x2000
That is what I used and I have it working.
- Status