- Joined
- Feb 18, 2011
- Messages
- 76
- Motherboard
- ProBook 4340s B6L98EA
- CPU
- i5 2450m
- Graphics
- Intel HD 3000
- Mobile Phone
Hello professionals, and thank you for your hard work for helping people feel OSX expirience on their mainstream laptops and PC's. The question is about installing ML 10.8 on probook 4340s/4540s/4740s or whatever new hp series with HM76 chipset. My config is: Sandybridge i5 2450m, HD 3000, 6Gb RAM, hdd500gb, Atheros 9485, Realtek LAN + (HD Webcam, 3x USB 3.0, 1x USB 2.0, HDMI). Using Unibeast for ML 1.5.3, loading with problems: after successfull load with -v -f stop at USB bus resets, and after 1-2 min see "Still waiting for root....". USB flash attached to USB 2.0 socket. After adding npci=0x2000 still have USB resets and "Still waiting for root..." but after several attempts successfully load to welcome screen, but system can't recognize mouse of keyboard (internal, i don't have usb keyboard). After several attempts i can load to Welcome screen with internal trackpad and keyboard, then run installation as usual with GPT and 1 partition on hdd. After restart use Unibeast as bootloader and then use ProBook installer 5b8. Select only General ML files, SSDT and almost all fixes, without DSDT (because i haven't adjusted dsdt for 4x40s series yet and my BIOS in F0.1 version is not listed of course). Of course use macbook pro 8.1 definition. After restart video in not properly recognized, show Shared 64Mb video without Quartz extreme. Speedstepping is working, bluetooth is working, LAN is working, USB 3.0 is not working, USB 2.0 sometimes working, webcam recognized but no picture in Facetime and Photoboth, sound is not working.
While loading with -x -f - it loads at the end, but a lot of messages with USB resets, but with normal boot can't load to desktop screen with messages about AppleSmartBatteryManager failed.
Questions:
1) is USB resets related to hardware problem with my usb flashdriver or because of HM76 chipset? What to do with this ****?
2) How to porperly recognize graphics?
3) What DSDT patches to apply to get proper DSDT for using with ML? I extract DSDT from Windows DSDTEditor and complete all errors, only have 180 remarks, but it's not proper DSDT for using with ML, i understand that i need to apply several patches to use it with ML? Am i right? What basic common patches to apply? please help, gave a link or guide?
4) I understand that Webcam can be used if i adjust some strings in DSDT, but where it is? Same for sound - i saw some guides how to edit appleHDA to be able to recognize soundchip. But it's not priority.
Any help will be appreciated,
Thank you so much for any of your help,
WBR
While loading with -x -f - it loads at the end, but a lot of messages with USB resets, but with normal boot can't load to desktop screen with messages about AppleSmartBatteryManager failed.
Questions:
1) is USB resets related to hardware problem with my usb flashdriver or because of HM76 chipset? What to do with this ****?
2) How to porperly recognize graphics?
3) What DSDT patches to apply to get proper DSDT for using with ML? I extract DSDT from Windows DSDTEditor and complete all errors, only have 180 remarks, but it's not proper DSDT for using with ML, i understand that i need to apply several patches to use it with ML? Am i right? What basic common patches to apply? please help, gave a link or guide?
4) I understand that Webcam can be used if i adjust some strings in DSDT, but where it is? Same for sound - i saw some guides how to edit appleHDA to be able to recognize soundchip. But it's not priority.
Any help will be appreciated,
Thank you so much for any of your help,
WBR