- Joined
- Mar 5, 2011
- Messages
- 2
- Motherboard
- P5QPRO
- CPU
- Core2Duo
- Graphics
- GTX250
- Mac
- Classic Mac
- Mobile Phone
Hi Guys,
I come back to you because I'm turning crazy with this Hackintosh :-o
The Specifications are :
MB : ASUS P8Z68-v PRO/GEN3 with flashed Bios v 3603.
CPU : I7 3770
GPU : HD4000 Included to CPU
Memory : 2x8GB Kingston 1600Mhz
I've tried several things, I'll try to remember them here :
1) Install With unibeast 1.7.0, can't boot the install without Safe Mode. Install goes to the end, reboot, no way to boot without the Safe Mode. I've install Multibeast 5.2.1 (like this post : http://legacy.tonymacx86.com/viewtopic.php?f=54&t=53056), remove my Flash drive, and yet, no boot possible without Safe Mode.
When I say "no boot", I mean I boot (no flags except -v, I've tried several "basics" (GE, PCIRoot, npci)) and it stuck on MACS_SWAPON Success with no KP or anything, I don't see also major differences between the errors in the normal boot and the Safe Mode boot (cpu power management error).
2) I've tried with few DSDT, I've also do mine with DSDT Editor and the Generic "P8XXXX 3XXX DSDT Patch".
3) I've tried few kexts, NullCPU, IO blabla, etc
4) I've tried with an other graphic card for an other Hackintosh that works just perfect with ML.
What I "succeed" ?
1) I did an other Hack two months ago with this MB, and it was working, but it was an other CPU and a dedicated GPU.
2) After few tweaks, I've boot up without any mouse and keyboard support, but the password input pipe were blinking. I've tried all the PS/2, USB kexts, didn't change anything.
3) I had a boot one time with a flickering and unreadable screen, but keyboard and mouse where working (without any kexts for them). I've tried with both graphic cards, but no change.
Now, I'm lost, and I'm turning to your knowledge
I come back to you because I'm turning crazy with this Hackintosh :-o
The Specifications are :
MB : ASUS P8Z68-v PRO/GEN3 with flashed Bios v 3603.
CPU : I7 3770
GPU : HD4000 Included to CPU
Memory : 2x8GB Kingston 1600Mhz
I've tried several things, I'll try to remember them here :
1) Install With unibeast 1.7.0, can't boot the install without Safe Mode. Install goes to the end, reboot, no way to boot without the Safe Mode. I've install Multibeast 5.2.1 (like this post : http://legacy.tonymacx86.com/viewtopic.php?f=54&t=53056), remove my Flash drive, and yet, no boot possible without Safe Mode.
When I say "no boot", I mean I boot (no flags except -v, I've tried several "basics" (GE, PCIRoot, npci)) and it stuck on MACS_SWAPON Success with no KP or anything, I don't see also major differences between the errors in the normal boot and the Safe Mode boot (cpu power management error).
2) I've tried with few DSDT, I've also do mine with DSDT Editor and the Generic "P8XXXX 3XXX DSDT Patch".
3) I've tried few kexts, NullCPU, IO blabla, etc
4) I've tried with an other graphic card for an other Hackintosh that works just perfect with ML.
What I "succeed" ?
1) I did an other Hack two months ago with this MB, and it was working, but it was an other CPU and a dedicated GPU.
2) After few tweaks, I've boot up without any mouse and keyboard support, but the password input pipe were blinking. I've tried all the PS/2, USB kexts, didn't change anything.
3) I had a boot one time with a flickering and unreadable screen, but keyboard and mouse where working (without any kexts for them). I've tried with both graphic cards, but no change.
Now, I'm lost, and I'm turning to your knowledge