Mini PC AMD Ryzen 7 5700U - Need Installation Help

[Funnyland]

@Edhawk
So everything was done as discussed and also deleted. After the restart, everything that can be seen in the picture was back under /Library/Preferences/SystemConfiguration. I deleted it beforehand.

There is not the desired data in the IO Reg

 

[Edhawk]

Remove all these plists.



Red line means delete the plist.

 

[Edhawk]

The two Network devices should not both be set as en0.

WiFi & Ethernet both set as en0, this is wrong

Delete the three plists with the red lines through them.

 

[Funnyland]

One picture is before I deleted the other which I deleted.

The third image is the IOREG and does not contain the line with Airportltlwm.


Now I restart once and send pictures after the restart

 

[Funnyland]

and this is what it looks like after the restart.

However, there is still no Airportltlwm in the IOREG under [email protected]

 

[Funnyland]

I have absolutely no idea, but could it be that the Airportltlwm is not integrated when starting?

If so, who is responsible for it?

 

[Funnyland]

Guys, I have some questions??

Is it the PC itself because it is simply bad? - I need another one. Which would be a shame because there aren't many with 2 NVME slots.

Is it because of the two WIFI cards? and need others??

or is it just too complicated?

 

[Edhawk]

It is more likely to be a User/configuration error than a hardware fault, if the same WiFi card works in Windows. Or with the non system DSDT-S3.aml table.

The Gen Machine systems, well mine does, support 2 x M.2 drives, just not 2 x 2280 drives. I have a 2242 & a 2280 M.2 drive in my Gen Machine Ren 7000 system.

 

[Funnyland]

Yes, I think it's just a configuration problem. I'll never be able to solve this, let alone find the error.

At least not alone, I urgently need help.

My small computer has 2 NVME slots for the hard drives.
Yes, you're right under Windows or Linux, the WiFi runs wonderfully on the computer. But it also works with the wrong DSDT file.

Therefore, if you still have ideas about what I should do, always say I'll try to do my best and do what you say.

 

[Edhawk]

Have you got any useful help over at Insanely Mac?