Kexts, DSDTS... ML Installation

[matteachus]

Do I have to add kexts and dsdts to get my installation running? I am really struggling as to find a solution to why I cannot get any further with my ML installation with Unibeast. Is the version of my BIOS ok as well?

I've dumbed down my system, tried a few graphics cards, using 2gb ram ...and still cannot get any further than the Apple logo.

My system is;

Gigabyte X79-UD3 Socket 2011 (f16)
Intel i7 4930K (3.4ghz ivy-bridge)
32gb RAM (Only have 2gb whilst installation is ongoing)
MSI GeForce 660 (Installed into the first PCIExpress slot)

Thanks for your time.

 

[Going Bald]

Do I have to add kexts and dsdts to get my installation running? I am really struggling as to find a solution to why I cannot get any further with my ML installation with Unibeast. Is the version of my BIOS ok as well?

I've dumbed down my system, tried a few graphics cards, using 2gb ram ...and still cannot get any further than the Apple logo.

My system is;

Gigabyte X79-UD3 Socket 2011 (f16)
Intel i7 4930K (3.4ghz ivy-bridge)
32gb RAM (Only have 2gb whilst installation is ongoing)
MSI GeForce 660 (Installed into the first PCIExpress slot)

Thanks for your time.

No need to remove RAM to install - you can max out the board and it won't matter a bit.
Have you tried doing a search for your board using the forum search engine? There are several builds in the User/Golden Builds forums that use it and most give settings and a "what I did to get it working" guide.

 

[matteachus]

Thanks again for replying. I have done so, followed many other guides including; http://www.tonymacx86.com/overclocking/81168-3930k-4-5ghz-ga-x79-ud3.html

...and still nothing. Is it because I am on f16 BIOS?

Starting to lose hope.