Internal drives not showing in Sierra installer

[katiepea]

What was the solution? Same exact problem here.

 

[RehabMan]

What was the solution? Same exact problem here.

What hardware?
What kind of internal drives?

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"

 

[katiepea]

Mobo: GA97-D3H
CPU: Intel Core i5 4460
Clover r3726
Samsung 850 EVO SSD

Created usb installer from createinstallmedia
Installed CloverUEFI
aptiofix2 selected


There's currently a gtx960 attached though I've tried without it (IGPU and gtx660), There's guides on the forums for this board, haven't seen the issue mentioned. Have reset bios defaults, disabled vt-d, achi is enabled for sata… I'm at a loss. Haven't been this stumped since 10.4.

 

[RehabMan]

Mobo: GA97-D3H
CPU: Intel Core i5 4460
Clover r3726
Samsung 850 EVO SSD

Not a laptop.

Desktop questions should be posted in the appropriate desktop forum.

 

[VioletDragon]

Mobo: GA97-D3H
CPU: Intel Core i5 4460
Clover r3726
Samsung 850 EVO SSD

Created usb installer from createinstallmedia
Installed CloverUEFI
aptiofix2 selected


There's currently a gtx960 attached though I've tried without it (IGPU and gtx660), There's guides on the forums for this board, haven't seen the issue mentioned. Have reset bios defaults, disabled vt-d, achi is enabled for sata… I'm at a loss. Haven't been this stumped since 10.4.

Attach config.plist.

 

[RehabMan]

Moved off-topic posts to new thread in correct forum.