Contribute
Register

Intel i5-3570K CPU,Z77-DS3H HD 4000, only 1024x746 resolution

Status
Not open for further replies.
Joined
Dec 1, 2012
Messages
17
Motherboard
10.11
CPU
Core i5-4460(HD4600)
Graphics
NA
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
i just bought my pc yesterday

Mainboard :Giga z77-ds3H (of course ver 1.1 and BIOS version F9)
CPU : i5 3570K
Ram : JetRam 8GB X 4
Micron M4 SSD 128G

I can install unibeast and totolink usb wireless card successfully,
however , everytime after installing the multibeast(MultiBeast - Mountain Lion 5.1.3) , i can not boot anymore.
the options in Multibeast I checked was following :

UserDSDT or DSDT-Free Installation

And in Customization Section I checked the following options
  • GraphicsEnabler = NO
  • Generate CPU States (because last i encountered the unknown CPU problem=_= so i checked it this time)
  • System Information : Mac Pro
  • 1080P

Does anyone has any idea ?
i can not found the Graphic option 64MB in my BIOS
I have change the AHCI opt for my hard drive.

Thank you all in advance..

IMG_0318.JPG
 
I can install unibeast and totolink usb wireless card successfully,
however , everytime after installing the multibeast(MultiBeast - Mountain Lion 5.1.3) , i can not boot anymore.
the options in Multibeast I checked was following :

UserDSDT or DSDT-Free Installation

And in Customization Section I checked the following options
  • GraphicsEnabler = NO
  • Generate CPU States (because last i encountered the unknown CPU problem=_= so i checked it this time)
  • System Information : Mac Pro
  • 1080P
Use macpro3,1. Do not use macpro4,1 or macpro5,1 (your problem); AppleTyMCEDriver.kext KP.
 
Hi,

it is mandatory that your graphics memory size is set to 96 MB.
Then try this:
http://www.osx86.net/view/2946-chameleon-2.1-intel_hd_graphics_4000.html

I cannot tell you if changing the BIOS setting to 96 MB would help without these KEXT files. I did this in one step. And after the next bootup I had the 1920x1200 resolution I missed so much... ;) VGA doesn't work; you have to use DVI or HDMI.

BTW: the bootup time is now reduced to <10 sec. Before this step my Hackintosh needed about a minute to boot.

GraphicsEnabler "yes"
KernelCache "yes"

I'm not at my HackMac. If wanted I can post details later...
 
Status
Not open for further replies.
Back
Top