Installation Freeze over Lenovo L430

[maxitenia]

Hi, I want to install Big Sur/Catalina in my Lenovo L430 (specs at bottom) the problem is when press install in the Opencore boot menu nothing happens, the notebook freeze, almost the same with clover just the diference is clover stuck after de "++++++++++++" bar.


OpenCore 0.9.0:
-Kext:
--AppleALC.kext
--Lilu.kext
--VirtualSMC.kext
--SMCSuperIO.kext
--SMCProcessor.kext
--SMCDellSensors.kext
--WhateverGreen.kext
--AirportItlwm.kext
-Drivers:
--HFSPlus.efi
--OpenRuntime.efi
-ACPI:
--SSDT-EC.aml (try prebuild from OpenCore and mine from the DSDT)

The log say that:
04:851 04:851 OCM: Failed to start image - Already started
05:649 00:797 BS: Failed to start OpenCore image - Already started

Clover 5151:
-Kext: (I try FAKE_SMC.kext too)
--Lilu.kext
--VirtualSMC.kext
--SMCSuperIO.kext
--SMCProcessor.kext
--WhateverGreen.kext
-Drivers:
--HFSPlus.efi
--OpenRuntime.efi
--ApfsDriverLoader.efi
-ACPI:
--SSDT-EC.aml (try prebuild from wherever I found in Internet and mine from the DSDT)


So Im stuck here, I try diferents build of OC/Clover and BigSur/Catalina.
Attached you can see my DSDT (buid with windows and SSDTTime)


Specs:
Processor: Intel Core i3-3110M processor (2 cores, 2.40GHz, 3MB cache)
Memory: 8GB DDR3 PC3-12800 (2 sticks)
SSD: Samsung 850 evo 250GB and try with Tecmiyo 512GB SATA3
Graphics: Intel HD Graphics 4000
Chipset: Mobile Intel HM76 Express Chipset
Ethernet: Realtek RTL8111F Gigabit Network Connection
PCIe WLAN: 11a/b/g/n, PCIe Half Mini Card, Intel Centrino Advanced-N 6205, 2x2


Thank You!.
Max

 

[Feartech]

Hi, I want to install Big Sur/Catalina in my Lenovo L430 (specs at bottom) the problem is when press install in the Opencore boot menu nothing happens, the notebook freeze, almost the same with clover just the diference is clover stuck after de "++++++++++++" bar.


OpenCore 0.9.0:
-Kext:
--AppleALC.kext
--Lilu.kext
--VirtualSMC.kext
--SMCSuperIO.kext
--SMCProcessor.kext
--SMCDellSensors.kext
--WhateverGreen.kext
--AirportItlwm.kext
-Drivers:
--HFSPlus.efi
--OpenRuntime.efi
-ACPI:
--SSDT-EC.aml (try prebuild from OpenCore and mine from the DSDT)

The log say that:
04:851 04:851 OCM: Failed to start image - Already started
05:649 00:797 BS: Failed to start OpenCore image - Already started

Clover 5151:
-Kext: (I try FAKE_SMC.kext too)
--Lilu.kext
--VirtualSMC.kext
--SMCSuperIO.kext
--SMCProcessor.kext
--WhateverGreen.kext
-Drivers:
--HFSPlus.efi
--OpenRuntime.efi
--ApfsDriverLoader.efi
-ACPI:
--SSDT-EC.aml (try prebuild from wherever I found in Internet and mine from the DSDT)


So Im stuck here, I try diferents build of OC/Clover and BigSur/Catalina.
Attached you can see my DSDT (buid with windows and SSDTTime)


Specs:
Processor: Intel Core i3-3110M processor (2 cores, 2.40GHz, 3MB cache)
Memory: 8GB DDR3 PC3-12800 (2 sticks)
SSD: Samsung 850 evo 250GB and try with Tecmiyo 512GB SATA3
Graphics: Intel HD Graphics 4000
Chipset: Mobile Intel HM76 Express Chipset
Ethernet: Realtek RTL8111F Gigabit Network Connection
PCIe WLAN: 11a/b/g/n, PCIe Half Mini Card, Intel Centrino Advanced-N 6205, 2x2


Thank You!.
Max

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

 

[maxitenia]

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

I follow the guide, but now in the boot menu show 2 options (opencore and macos...) when I press opencore it's freeze again and when press macos.... the system reboot and when start say this (look at the image).

 

[Feartech]

I follow the guide, but now in the boot menu show 2 options (opencore and macos...) when I press opencore it's freeze again and when press macos.... the system reboot and when start say this (look at the image).

View attachment 564632

make sure to use all the files from the guide

 

[maxitenia]

make sure to use all the files from the guide

I do all the steps of the guide, I follow the OC guide and Clover guide and I'm stuck.

With clover 5118 the boot stuck in:

Patching kernel for injected kext...
load kexts patched
=> patch2 SIP applied
==> patched KxldUnmap (10.14 - recent macOS)
Pausing 5 secs...

With OC 0.6.3 and 0.8.x the boot stuck in:

AAPL: [EB|`B:WFDW] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49

With OC 0.9.x stuck in "++++++++"

I use SSDT-EC dumped by me, prebuild from OC page, prebuild from here and many others.

I leave the logs and EFI's.

Thank you.

 

[Feartech]

I do all the steps of the guide, I follow the OC guide and Clover guide and I'm stuck.

With clover 5118 the boot stuck in:


With OC 0.6.3 and 0.8.x the boot stuck in:


With OC 0.9.x stuck in "++++++++"

I use SSDT-EC dumped by me, prebuild from OC page, prebuild from here and many others.

I leave the logs and EFI's.

Thank you.

use the files from the guide:

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

 

[maxitenia]

use the files from the guide:

[Guide] Booting The USB Installer Using OpenCore

A guide in setting up your USB installer using OpenCore. You must have either a built-in ethernet or compatible Broadcom Wifi in your laptop for this guide to work. Built-in Intel Wifi can also work if set correctly...

www.tonymacx86.com

I follow the guide and only get a black screen without a log (the log was empty).

 

[maxitenia]

Hi, me again.
I discover what happens with my laptop, the MSR is locked and this is the problem I can't unlock them .
I try many many guides.
I use UEFItools, IRFtools, Phoenix bios tools, whit the bios image from the lenovo web page and I can't do the unlock.

So, I need help.

Thank you.!!