- Joined
- Jun 6, 2011
- Messages
- 37
- Motherboard
- Gigabyte GA-H77-DS3H
- CPU
- Intel Core i7-3770K
- Graphics
- Geforce GTX 770 (2GB) + Geforce GTX 650 (1GB)
- Mac
- Classic Mac
- Mobile Phone
Hey guys. I recently bought a second Monitor (the exact same as my normal one).
After reading a bit i was able to get both on the GTX 650 working.
Then i came up with the Idea to enable the HD4000 on my i7-3770K to make use of the HD4000 which was disabled before.
After i first plugged in the Monitor into the HD4000 HDMI Slot and enabled it in the Bios (with 64mb) it just worked fine.
After a second boot the System wasn't able to boot.
My attempts to get it working:
plug out the GTX650 - not working
set init graphics to auto - iGPU not working
set init graphics to PEG - not working
use the DVI Port on the Motherboard instead of HDMI - not working
tried to boot with UseKernelCache=no - not working
tried to use IGPlaformID=0166000A - not working
tried to set the iGPU Memory to 32mb - not working
I do have GraphicsEnabler=No and IGPEnabler=Yes.
so clarify out again: i want 1 Monitor on my GTX and 1 Monitor on my HD4000.
what i see is the this:
I would appreciate help
After reading a bit i was able to get both on the GTX 650 working.
Then i came up with the Idea to enable the HD4000 on my i7-3770K to make use of the HD4000 which was disabled before.
After i first plugged in the Monitor into the HD4000 HDMI Slot and enabled it in the Bios (with 64mb) it just worked fine.
After a second boot the System wasn't able to boot.
My attempts to get it working:
plug out the GTX650 - not working
set init graphics to auto - iGPU not working
set init graphics to PEG - not working
use the DVI Port on the Motherboard instead of HDMI - not working
tried to boot with UseKernelCache=no - not working
tried to use IGPlaformID=0166000A - not working
tried to set the iGPU Memory to 32mb - not working
I do have GraphicsEnabler=No and IGPEnabler=Yes.
so clarify out again: i want 1 Monitor on my GTX and 1 Monitor on my HD4000.
what i see is the this:
Code:
com.apple.driver.AppleIntelFramebufferCapri start failed
I would appreciate help