***i just need a link please & thank you***

[joeyduhbomb]

HELP!!! Stuck at Apple logo after booting USB

I just need a link for correct instructions to Hackintosh for my system as my system is just a few years old.

CPU: Intel Core i7-4820K 3.7GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus Rampage IV Gene Micro ATX LGA2011 Motherboard
Memory: Corsair Vengeance 32GB (4 x 8GB) DDR3-1600 Memory
Storage: Kingston HyperX Fury 240GB 2.5" Solid State Drive
Storage: Western Digital BLACK SERIES 1TB 3.5" 7200RPM Internal Hard Drive
Graphics Card: Asus GeForce GTX 770 4GB DirectCU II Video Card
Case: NZXT H440 (Glossy White/Black) ATX Mid Tower Case
Power Supply: Corsair Builder 750W 80+ Bronze Certified ATX Power Supply
Operating System: Microsoft Windows 10 Home OEM (64-bit)
Monitor: Acer K272HUL 75Hz 27.0" Monitor

This is the first link I was looking at and not sure if there's anything different about my computer. http://www.tonymacx86.com/el-capita...-supported-intel-based-pc.html#download_elcap

This will be my first time running hackintosh and any and all extra feedback before going into this would be super appreciated!! Thanks!

 

[nobodynose]

I just need a link for correct instructions to Hackintosh for my system as my system is just a few years old.

CPU: Intel Core i7-4820K 3.7GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus Rampage IV Gene Micro ATX LGA2011 Motherboard
Memory: Corsair Vengeance 32GB (4 x 8GB) DDR3-1600 Memory
Storage: Kingston HyperX Fury 240GB 2.5" Solid State Drive
Storage: Western Digital BLACK SERIES 1TB 3.5" 7200RPM Internal Hard Drive
Graphics Card: Asus GeForce GTX 770 4GB DirectCU II Video Card
Case: NZXT H440 (Glossy White/Black) ATX Mid Tower Case
Power Supply: Corsair Builder 750W 80+ Bronze Certified ATX Power Supply
Operating System: Microsoft Windows 10 Home OEM (64-bit)
Monitor: Acer K272HUL 75Hz 27.0" Monitor

This is the first link I was looking at and not sure if there's anything different about my computer. http://www.tonymacx86.com/el-capita...-supported-intel-based-pc.html#download_elcap

This will be my first time running hackintosh and any and all extra feedback before going into this would be super appreciated!! Thanks!

I'll take a stab at it.

The guide you have the link for is what you should use, though since your system is based on the X79 chipset there's extra work you have to do with regards to power management (Speedstep). Here's a guide written by shilohh, one of our moderators, on X79 power management:

http://www.tonymacx86.com/general-help/127574-guide-asus-x79-os-x-controlled-speedstep.html.​

You will also want to take a look at MK500's build guide for his hack (co-written by shilohh), based on the same motherboard you have:

http://www.tonymacx86.com/user-buil...eme-core-i7-3930k-radeon-hd-7970-ghz-3gb.html​

Your graphics will probably work OOB without the Nvidia alternative drivers, as most Kepler-based cards do not need them (they work with the drivers that come with OS X):

http://www.tonymacx86.com/graphics/...7xx-kepler-cards-work-graphicsenabler-no.html​

Note that the Clover equivalent to Chimera's "GraphicsEnabler=No" is to not do Nvidia graphics injection:

    <key>Graphics</key>
    <dict>
        <key>Inject</key>
        <dict>
            <key>ATI</key>
            <false/>
            <key>Intel</key>
            <false/>
[B]            <key>NVidia</key>[/B]
[B]            <false/>[/B]
        </dict>
    </dict>

That's about all I can think of - good luck, and if you get stuck there are plenty of folks here who will be happy to help!

 

[joeyduhbomb]

Thank you!! I will let you know how it goes!

http://www.tonymacx86.com/mavericks...-4930k-msi-gtx-780-dual-boot-hacktintosh.html