- Joined
- Jun 29, 2012
- Messages
- 10
- Mac
- Classic Mac
- Mobile Phone
System HP Z620
BIOS - BIOS Version/Date Hewlett-Packard J61 v03.18, 01/07/2013 (AMI I think)
2 X Processor Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, 3301 Mhz, 4 Core(s), 8 Logical Processor(s)
8 x 2GB Memory 16GB DDR3-1600
Graphics - NVIDIA K600 Quadro
HDrive - Model ATA WDC WD5000HHTZ-6 SCSI Disk Device (500GB) Set to AHCI.
Usually story new to this so please be gentle..So followed Maverick guide to the letter, all went smooth with exception of boot flag npci=0x3000. Installed OS and restarted again smooth to setup screen but then thing slowed considerably. Managed to get through install, restart fast back to login screen. Next onto Multibeast.. no joy.. see below..
At login screen keystrokes started to be unusably slow, once desktop arrives some functions are sort of usable but then system grinds to a halt, logs out with other random happenings.
So shutdown and boot safe, system straight through to login and then into system no errors, very fast with everything available.
On reading 100s of posts have tried many flags, dart=0 etc still with no sucess. Have seen a thread re Z820 and V2 processors/mach_kernel but my specs do not seem to match. System is fantastic in safe but would really appreciate any help someone may be able to give, as feel its something small holding me back. Cheers J
BIOS - BIOS Version/Date Hewlett-Packard J61 v03.18, 01/07/2013 (AMI I think)
2 X Processor Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz, 3301 Mhz, 4 Core(s), 8 Logical Processor(s)
8 x 2GB Memory 16GB DDR3-1600
Graphics - NVIDIA K600 Quadro
HDrive - Model ATA WDC WD5000HHTZ-6 SCSI Disk Device (500GB) Set to AHCI.
Usually story new to this so please be gentle..So followed Maverick guide to the letter, all went smooth with exception of boot flag npci=0x3000. Installed OS and restarted again smooth to setup screen but then thing slowed considerably. Managed to get through install, restart fast back to login screen. Next onto Multibeast.. no joy.. see below..
At login screen keystrokes started to be unusably slow, once desktop arrives some functions are sort of usable but then system grinds to a halt, logs out with other random happenings.
So shutdown and boot safe, system straight through to login and then into system no errors, very fast with everything available.
On reading 100s of posts have tried many flags, dart=0 etc still with no sucess. Have seen a thread re Z820 and V2 processors/mach_kernel but my specs do not seem to match. System is fantastic in safe but would really appreciate any help someone may be able to give, as feel its something small holding me back. Cheers J