- Joined
- May 2, 2014
- Messages
- 22
- Motherboard
- Gigabyte GA-Z170X-UD5-TH
- CPU
- i7-6700K
- Graphics
- Nvidia GTX 980
- Mac
I've been asked by nguyenmac to start a new thread for my laptop model. So am pasting in my initial post from here:http://www.tonymacx86.com/hp-proboo...vericks-clover-bootloader-257.html#post880438
___
I've got an HP Elitebook 8760w. So maybe my testing can add yet another model to the PBI installer!
Installing 10.9.5 from the app store via a 16gb USB stick using the guide here:
Guide To Install Mavericks with Clover Bootloader
Used PBI 6.2.10 (Oct 1st edition), v2854 on screen when bootable, 2932 on boot screen when not.
I can successfully install OSX and get to the desktop in 1600x900 no problem!
Working: Ethernet, track pad, mouse, keyboard, USB 3.0 & 2.0 all work.
Problems: Monitor is dark upon first boot. Have to unplug AC adapter for screen to reach full brightness.
No audio device/sound. Even tried rebuilding the cache with kextwizard with no luck.
No WiFi: (Not expected. I know my NIC is not supported. No worries there. I will buy something compatible)
Still not sure which model to choose within PBI though as mine isn't listed specifically.
Specs: (From Windows Device Manager)
HP Elitebook 8760w.
i7-2630QM 2.0GHz
1600x900
Renesas USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
Chipset: Intel 6 Series/C200
QM67 Express Chhipset
AMD FirePro M5950 Mobility Pro Graphics
hp BD-RE BT10N DVD rom drive
JMicron OHCI Compliant IEEE 1394
JMicron memory driver PCIe SD and SD/MMC
Synaptics PS/2 Port Touchpad
LSI HDA Modem
Intel 82579LM Gigabit Network
Intel Centrino Ultimate-N 6300 AGN 633ANHMW
TPM 1.2 module
AMD High Definition Audio Device
IDT High Definition Audio CODEC
Tried 8x60p, but is the p the same as the w models? And I have an AMD graphics card, so also tried 8x70p with no luck on the audio either.
So both don't seem to work, but probably my noob status is the problem. Does this mean you need to add my model to PBI before it will work?
Thanks so much!
Rational
Edit:
Just did another fresh install and tried the 8x60p AMD model again and it gives me the warning that
1. You haven't pressed F4 at Clover screen. (I did)
2. You haven't selected the right main model-specific patch.
And another:
Kernel extension is not from an identified developer, etc.
So far, I can only boot off of the Clover USB key EFI x64 unless I copy its EFI onto the hard drive EFI.
But then every time I run PBI it kills the next boot. Either kernel panics or stays forever on the grey apple screen with rotating disc.
I'm gathering these now for you:
If you have any problems with PBI, please send me your following files:
- EFI/CLOVER/ folder in EFI partition (mounted by CC)
- /var/log/install.log in Mac partition (hidden folder)
- /S/L/E/AppleHDAIDT.kext in Mac partition.
___
I've got an HP Elitebook 8760w. So maybe my testing can add yet another model to the PBI installer!
Installing 10.9.5 from the app store via a 16gb USB stick using the guide here:
Guide To Install Mavericks with Clover Bootloader
Used PBI 6.2.10 (Oct 1st edition), v2854 on screen when bootable, 2932 on boot screen when not.
I can successfully install OSX and get to the desktop in 1600x900 no problem!
Working: Ethernet, track pad, mouse, keyboard, USB 3.0 & 2.0 all work.
Problems: Monitor is dark upon first boot. Have to unplug AC adapter for screen to reach full brightness.
No audio device/sound. Even tried rebuilding the cache with kextwizard with no luck.
No WiFi: (Not expected. I know my NIC is not supported. No worries there. I will buy something compatible)
Still not sure which model to choose within PBI though as mine isn't listed specifically.
Specs: (From Windows Device Manager)
HP Elitebook 8760w.
i7-2630QM 2.0GHz
1600x900
Renesas USB 3.0 eXtensible Host Controller - 0096 (Microsoft)
Chipset: Intel 6 Series/C200
QM67 Express Chhipset
AMD FirePro M5950 Mobility Pro Graphics
hp BD-RE BT10N DVD rom drive
JMicron OHCI Compliant IEEE 1394
JMicron memory driver PCIe SD and SD/MMC
Synaptics PS/2 Port Touchpad
LSI HDA Modem
Intel 82579LM Gigabit Network
Intel Centrino Ultimate-N 6300 AGN 633ANHMW
TPM 1.2 module
AMD High Definition Audio Device
IDT High Definition Audio CODEC
Tried 8x60p, but is the p the same as the w models? And I have an AMD graphics card, so also tried 8x70p with no luck on the audio either.
So both don't seem to work, but probably my noob status is the problem. Does this mean you need to add my model to PBI before it will work?
Thanks so much!
Rational
Edit:
Just did another fresh install and tried the 8x60p AMD model again and it gives me the warning that
1. You haven't pressed F4 at Clover screen. (I did)
2. You haven't selected the right main model-specific patch.
And another:
Kernel extension is not from an identified developer, etc.
So far, I can only boot off of the Clover USB key EFI x64 unless I copy its EFI onto the hard drive EFI.
But then every time I run PBI it kills the next boot. Either kernel panics or stays forever on the grey apple screen with rotating disc.
I'm gathering these now for you:
If you have any problems with PBI, please send me your following files:
- EFI/CLOVER/ folder in EFI partition (mounted by CC)
- /var/log/install.log in Mac partition (hidden folder)
- /S/L/E/AppleHDAIDT.kext in Mac partition.